BMW i3 Coolant Expansion Tank Cap
This BMW i3 coolant expansion tank cap seals the cooling system and holds it at the correct pressure. Electric cars use coolant to manage battery, motor and electronics temperature, so a good seal matters. A failing cap can let coolant escape, let the level drop or allow air into the system.
Specifications at a glance: opening pressure 1.4 bar and material plastic.
Signs Your Coolant Expansion Tank Cap Needs Replacing
Signs of a faulty cap include coolant loss with no visible leak, coolant around the tank, a cracked or perished seal and a low coolant warning. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the BMW i3. Across the range, it covers versions from 125 kW to 135 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
You can choose Febi or Blue Print from the options above. Both brands come from the same German parts group and are made to match the original part in fit and function, so either is a factory-quality replacement that fits without modification. It replaces BMW part numbers 17 11 7 639 024, 17 13 2 754 264 and 17 13 5 A1B D89. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Easy to fit. Only open the tank when the system is cold, check the coolant level, and screw the new cap on firmly by hand. Check the coolant level after a short drive. Replacing an old cap is one of the cheapest cooling system fixes. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you. Keeping on top of worn parts also helps your car sail through its next MOT. Take a photo of the old part before you remove it, so you can compare it with the new one.
Specifications
| Specification | Value |
|---|---|
| Opening Pressure | 1.4 bar |
| Material | Plastic |
| Part Number | Febi 36772 | Blue Print ADB119901 |
Fits The Following BMW Models
| Model | Version |
|---|---|
| i3 (I01) 2013 to 2022 | i3s – 135 kW / 184 hp |
| i3 (I01) 2013 to 2022 | i3s Range Extender – 135 kW / 184 hp |
| i3 (I01) 2013 to 2022 | i3 – 125 kW / 170 hp |
| i3 (I01) 2013 to 2022 | i3 Range Extender – 125 kW / 170 hp |
Explore More Parts
BMW i3 Coolant Expansion Tank Cap FAQs
Will this coolant expansion tank cap fit my BMW i3?
It fits the BMW i3. Check the part number on your existing part matches before ordering.
What part number does the BMW i3 coolant expansion tank cap replace?
It replaces BMW part numbers 17 11 7 639 024, 17 13 2 754 264 and 17 13 5 A1B D89.
Can a faulty expansion tank cap cause coolant loss?
Yes. A worn seal can let coolant escape as vapour.
When is it safe to remove the cap?
Only when the system is cold, as it is under pressure when warm.
What is the difference between Febi and Blue Print?
Both come from the same German parts group and are made to match the original part in fit and function. Choose whichever you prefer.
What are the specifications of this coolant expansion tank cap?
Specifications at a glance: opening pressure 1.4 bar and material plastic.
What pressure does it open at?
It opens at 1.4 bar.

Reviews
There are no reviews yet.