BMW i3 Rear Brake Caliper with Parking Brake Motor
This BMW i3 rear brake caliper with parking brake motor is the rear brake unit that clamps the pads for normal braking and also applies the electric parking brake through its built-in motor. Because the parking brake is electric, there is no handbrake cable to adjust. The motor drives the caliper piston in and out when you press the parking brake switch. It is a new part, not a remanufactured unit.
Specifications at a glance: caliper type 1 piston, piston diameter 33.93 mm, material chilled cast iron and condition new part.
Signs Your Brake Caliper with Parking Brake Motor Needs Replacing
Signs of a failing unit include a parking brake warning light, a parking brake that will not apply or release, a grinding noise from the motor and a rear brake that drags or gets hot. Corrosion of the caliper piston or slides is a common cause on electric cars. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the BMW i3. It fits cars with 280 mm brake discs. Choose the version you need from the options above. Across the range, it covers versions from 125 kW to 135 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part numbers are 198421 (left) and 198420 (right). It replaces BMW part numbers 34 20 6 883 025, 34 20 6 883 026, 34 21 6 860 005 and 34 21 6 860 006. Check the part number on your existing part matches before ordering.
Fitting Advice
The electric parking brake must be put into service mode with a diagnostic tool before the caliper is removed. Bleed the brakes with fresh fluid after fitting and test the parking brake before driving. Check the rear pads and disc on the same side while the caliper is off. Make sure the motor plug is clean and dry before reconnecting it.
Specifications
| Specification | Value |
|---|---|
| Caliper Type | 1 piston |
| Piston Diameter | 33.93 mm |
| Material | Chilled cast iron |
| Condition | New part |
| Vehicle Equipment | For vehicles with electric parking brake |
| Supplied with | Parking brake motor |
| Part Number | Febi 198421 (left) | Febi 198420 (right) |
Fits The Following BMW Models – Rear Axle Left (Febi 198421)
| Model | Version | Notes |
|---|---|---|
| i3 (I01) 2013 to 2022 | i3s – 135 kW / 184 hp | Rear axle left; With 280 mm brake discs |
| i3 (I01) 2013 to 2022 | i3s Range Extender – 135 kW / 184 hp | Rear axle left; With 280 mm brake discs |
| i3 (I01) 2013 to 2022 | i3 – 125 kW / 170 hp | Rear axle left; With 280 mm brake discs |
| i3 (I01) 2013 to 2022 | i3 Range Extender – 125 kW / 170 hp | Rear axle left; With 280 mm brake discs |
Fits The Following BMW Models – Rear Axle Right (Febi 198420)
| Model | Version | Notes |
|---|---|---|
| i3 (I01) 2013 to 2022 | i3s – 135 kW / 184 hp | Rear axle right; With 280 mm brake discs |
| i3 (I01) 2013 to 2022 | i3s Range Extender – 135 kW / 184 hp | Rear axle right; With 280 mm brake discs |
| i3 (I01) 2013 to 2022 | i3 – 125 kW / 170 hp | Rear axle right; With 280 mm brake discs |
| i3 (I01) 2013 to 2022 | i3 Range Extender – 125 kW / 170 hp | Rear axle right; With 280 mm brake discs |
Explore More Parts
BMW i3 Rear Brake Caliper with Parking Brake Motor FAQs
Will this rear brake caliper with parking brake motor fit my BMW i3?
It fits the BMW i3. It fits cars with 280 mm brake discs. Check the part number on your existing part matches before ordering.
What part number does the BMW i3 rear brake caliper with parking brake motor replace?
It replaces BMW part numbers 34 20 6 883 025, 34 20 6 883 026, 34 21 6 860 005 and 34 21 6 860 006.
Does the electric parking brake need resetting after fitting?
Yes. Put the parking brake into service mode with a diagnostic tool or the car’s menu before removal, then reset it after fitting.
Why is my parking brake warning light on?
A faulty parking brake motor or seized rear caliper is a common cause. A diagnostic check will confirm it.
Who makes this rear brake caliper with parking brake motor?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this rear brake caliper with parking brake motor?
Specifications at a glance: caliper type 1 piston, piston diameter 33.93 mm, material chilled cast iron, condition new part and supplied with Parking brake motor.
Which side do I need?
On the BMW i3, Febi 198421 (BMW 34 20 6 883 026) is listed for the rear left and Febi 198420 (BMW 34 20 6 883 025) for the rear right. Choose the side from the options above.

Reviews
There are no reviews yet.