BMW iX Coolant Expansion Tank with Level Sensor
This BMW iX coolant expansion tank with level sensor holds the coolant that expands and contracts as the system heats and cools, and is where you check and top up the level. On an electric car the cooling system looks after the battery, motor and power electronics. It is made of plastic, has two hose connections and comes with the coolant level sensor already fitted. The cap is not included, so reuse your original.
Specifications at a glance: material plastic, level sensor Included, cap Not included and connections 2.
Signs Your Coolant Expansion Tank Needs Replacing
Replace the tank if it is cracked, leaking, discoloured or brittle, or if the level sensor is faulty. Coolant loss and a low coolant warning are common signs. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the BMW iX. In detail, that covers the BMW iX (I20) 2021 on. Across the range, it covers versions from 240 kW to 455 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part number is 1008270. It replaces BMW part number 17 13 8 474 796. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Work on a cold system only. Drain or clamp off the coolant, swap the tank, refill with the coolant type the manufacturer specifies and bleed the system as set out in the service information. Use the coolant type the car maker specifies. Check the hoses and clips while the tank is out. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you.
Specifications
| Specification | Value |
|---|---|
| Material | Plastic |
| Level Sensor | Included |
| Cap | Not included |
| Connections | 2 |
| Warranty | 3 years |
| Part Number | Febi 1008270 |
Fits The Following Models
| Make | Model | Version |
|---|---|---|
| BMW | iX (I20) 2021 on | iX 40 xDrive – 240 kW / 326 hp |
| BMW | iX (I20) 2021 on | iX 50 xDrive – 385 kW / 523 hp |
| BMW | iX (I20) 2021 on | iX M60 xDrive – 455 kW / 619 hp |
Explore More Parts
BMW iX Coolant Expansion Tank with Level Sensor FAQs
Will this coolant expansion tank with level sensor fit my BMW iX?
It fits the BMW iX. Check the part number on your existing part matches before ordering.
What part number does the BMW iX coolant expansion tank with level sensor replace?
It replaces BMW part number 17 13 8 474 796.
Why do electric cars have coolant?
Coolant controls the temperature of the battery, motor and electronics.
What are the signs of a cracked expansion tank?
Coolant loss, damp patches around the tank and a low coolant warning.
Who makes this coolant expansion tank with level sensor?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this coolant expansion tank with level sensor?
Specifications at a glance: material plastic, level sensor Included, cap Not included, connections 2 and warranty 3 years.
Is the level sensor included?
Yes, the coolant level sensor comes fitted to the tank.


Reviews
There are no reviews yet.