Enhance the look of your Tesla Model 3 with a Carbon Fibre Effect Spoiler from EV Accessories.
Each spoiler comes with pre-installed adhesive tape to fix your performance spoiler to your Model 3.
Simply clean the rear boot area with hot soapy water and allow to dry, then using an alcohol cleaning wipe, clean the surface of the boot and and inside area of the spoiler again allowing to dry.
Line up the spoiler to your vehicle ensuring you have it positioned correctly and mark the end positions of the spoiler on the car with masking tape, once you are happy remove the other backing of the tape and fix into position using you masking tape as a guide. Apply pressure to ensure the tape is firmly bonded. You will should start from the middle working outwards towards the sides of the car, pressing it into place, be-careful not to twist the spoiler during installation.
Do not apply in cold (below 20deg C) or damp conditions.
Do not apply excessive pressure to the spoiler when closing the boot lid, this could cause the spoiler to split along the mating seems.