Tesla Model 3 Diagnostic Cable OBD-II Adapter – Pre Jan 2019


  • Model 3 – Pre January 2019 Build Date Only.

Only 1 left in stock (can be backordered)

Model 3 Diagnostic Lead OBD
Tesla Model 3 Diagnostic Cable OBD-II Adapter - Pre Jan 2019 £62.99

Add An OBDLinkMX+

OBDLINK MX+ OBD2 Bluetooth Scanner Tool

  • Maximum vehicle coverage
  • Supports SW-CAN & MS-CAN protocols
  • World’s fastest Bluetooth OBD-II adaptor
  • Small form factor
  • Automatic sleep & wake-up
  • Free included iOS, Android, and Windows apps
  • Supported by dozens of 3rd party apps
  • Order in stock products before 12.15pm for same working day dispatch.
  • All Items ship from our UK warehouse.

Tesla vehicle Diagnostic Cable Adapter – For Tesla Model 3 Diagnostic data port. (Pre Jan 2019 Models Only, Mainly American Market Vehicles).

The Tesla Model 3 is equipped with a propitiatory diagnostic data connectors. This connector gives users access to a lot of useful information about your Model 3, such as battery capacity, battery voltage, drive-train output, HVAC data etc..

There are a few 3rd party apps that are available, that with the use of an OBD-II module, and a diagnostic cable, will read this data and display it in human readable form.

These cables can also be purchased as part of a Tesla Diagnostic Bundles HERE

Location of Diagnostic connector

Model 3

The Model 3 Port is located at the rear of the centre console and accessible from the rear footwell.

  • Model 3 – Pre January 2019 Build Date Only.

There are two versions of the connector depending on when your Model 3 was built. This cable is for PRE Jan 2019 Models Mainly sold in America.

Please note that your vehicles BUILD DATE is NOT the same as the date of first registration.

The Tesla Model 3 MUST be shut down before inserting the cable in to the loom.  The shut down takes 15 minutes to complete and is performed from the screen within the vehicle.  Failure to shut down the car before inserting the cable into the loom may damage your vehicle and or cause faults.

Application software And Hardware.

You will need to purchase an OBD-II adapter as well as the application software to decode and display the data off the diagnostic connector.

Application software currently available is ScanMyTesla (Android) and TMSpy For Andriod Or TMSpy For IOS. Either app will work with the ELM327 compatible OBD-II bluetooth adapter, with the above cable. Care must be taken when selecting the OBD-II adapter, as not all cheap adapters support the CAN bus protocol (even if they say they do). We would recommend an ELM327 V2.2, but any high quality adapter that supports the ST command set is recommended. Please refer to application software for further help with ODB-II adapter selection.

Please note.  Connecting equipment to your Tesla is done entirely at your own risk.  EV Accessories Limited will not be held responsible for any damage caused to your vehicle through incorrect use of this product. The user is responsible for checking for any damage to the cable prior to use. both upon receipt and for each and every use.

Additional information

Weight .500 kg
Dimensions 100 × 60 × 20 mm
Car Model

Car Brand


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.