Maxus eDeliver 3 Rear Brake Pad Set
This Febi brake pad set fits the Maxus eDeliver 3. It fits the rear axle. It presses against the brake disc when you brake, providing the friction that slows and stops the car.
Regenerative braking takes much of the load on an electric car, so the pads last longer, but they still wear and they can also glaze or corrode when they are not used firmly. Thin, glazed or contaminated pads lead to squealing, a longer pedal, uneven braking and a warning on some cars. Worn pads can also damage the disc. A fresh pad set restores strong, predictable braking and protects the discs.
The Febi part number is 193459, and the same part is also sold as Blue Print ADBP420163.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
It fits the Maxus eDeliver 3 (SV3, 2020 on; SH5, 2019 on). Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Friction material matched to the original pad
- Correct backing plate shape for a precise fit in the caliper
- Low-noise design for quiet stopping
- Supplied as a full axle set
Specifications
- Fitting position: rear axle
- Additional Information / Parts: With anti-squeal shim
- Approval: ECE R90 Approval
- Brake Lining Thickness (incl. Backing Plate): 15,5 mm
- Length: 101,3 mm
- Wear warning contact: with acoustic wear warning
- Width: 46,51 mm
Replaces Maxus part number C00168954.
Installation
Brake pads are always replaced as a full axle set. Check the disc condition and thickness at the same time, clean and lightly lubricate the pad contact points, and wind the caliper piston back carefully. Some cars need the electric parking brake put into service mode before rear pads can be changed. Bed the new pads in with a few gentle stops. If you are unsure, have a qualified technician fit them.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting position | rear axle |
| Additional Information / Parts | With anti-squeal shim |
| Approval | ECE R90 Approval |
| Brake Lining Thickness (incl. Backing Plate) | 15,5 mm |
| Length | 101,3 mm |
| Wear warning contact | with acoustic wear warning |
| Width | 46,51 mm |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Maxus | eDELIVER 3 (SV3) 2020 – | (E) – 90 kW / 122 hp |
| Maxus | EV30 (SH5) 2019 – | (E) – 100 kW / 136 hp |
| Maxus | EV30 (SH5) 2019 – | (E) – 70 kW / 95 hp |
Maxus eDeliver 3 Rear Brake Pad Set FAQs
Which part numbers does it replace?
It replaces C00168954.
Is this a full axle set?
Yes. The set contains the pads needed for both wheels on one axle.
How often should brake pads be changed on an electric car?
There is no fixed mileage. Check them at each service. They often last longer on electric cars because of regenerative braking.
Do I need to replace the discs as well?
Only if the discs are worn below minimum thickness, scored or corroded. Check them when fitting new pads.
Will it fit my Maxus eDeliver 3?
It fits the Maxus eDeliver 3 (SV3, 2020 on; SH5, 2019 on). Compare the part number on your existing part.
Is this a genuine Maxus part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.