Maxus eDeliver 3 Rear Left Wheel Cylinder
This Febi wheel cylinder fits the Maxus eDeliver 3. It fits the rear axle left. It pushes the brake shoes outwards against the drum when you press the brake pedal.
Rear drum brakes on light vans are used less when regenerative braking does much of the work, and the wheel cylinder seals can stick, seep or corrode. A leaking or seized cylinder causes poor rear braking, a pull, brake fluid on the inside of the wheel or a failed MOT. A new cylinder restores smooth, even rear braking. It is a direct replacement for the original part, so no changes to the car are needed. Each part is checked against the original part number listings before it is listed on this page. Compare the old part with the photos and the specifications before ordering.
The Febi part number is 188714, and the same part is also sold as Blue Print ADBP440019.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
It fits the Maxus eDeliver 3 (SV3, 2020 on; SH5, 2019 on). Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Made to the original bore size and fittings
- New seals and pistons
- Restores even rear braking
- Ready to fit
Specifications
- Fitting position: rear axle left
- Material: aluminium
- Piston Outer Diameter: 22,2 mm
Replaces Maxus part number C00238909.
Installation
Remove the drum and brake shoes to reach the cylinder, and check the shoes for fluid contamination. Fit the new cylinder, refit the shoes and adjust them, then bleed the brake system. Replacing both cylinders on the axle gives even braking. Have a qualified technician fit it if you are unsure.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting position | rear axle left |
| Material | aluminium |
| Piston Outer Diameter | 22,2 mm |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Maxus | eDELIVER 3 (SV3) 2020 – | (E) – 90 kW / 122 hp |
| Maxus | EV30 (SH5) 2019 – | (E) – 70 kW / 95 hp |
Maxus eDeliver 3 Rear Left Wheel Cylinder FAQs
Which part numbers does it replace?
It replaces C00238909.
Do I need to bleed the brakes?
Yes. The system must be bled after a wheel cylinder is replaced.
Should I replace the shoes too?
If the old shoes have fluid on them, yes. Contaminated shoes cannot be cleaned.
Should both sides be replaced?
It is good practice for even braking.
Will it fit my Maxus eDeliver 3?
It fits the Maxus eDeliver 3 (SV3, 2020 on; SH5, 2019 on). Compare the part number on your existing part.
Is this a genuine Maxus part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.