Audi Q4 e-tron Rear Axle Beam Mount
This Audi Q4 e-tron rear axle beam mount is the rubber and metal mounting that holds the suspension arm in place while absorbing road shocks and vibration. The rubber hardens and cracks with age, and the extra weight of an electric car adds to the load.
Specifications at a glance: height or thickness 86 mm, inner diameter 20 mm, material rubber / metal and outer diameter 99 mm.
Signs Your Rear Axle Beam Mount Needs Replacing
Signs of a worn bush include a clunk over bumps or when braking, a vague or wandering feel at speed, uneven tyre wear and visible cracks or splits in the rubber. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the Audi Q4 e-tron and Q4 Sportback e-tron, Ford Explorer EV and Capri IV, VW ID.3, ID.4, ID.5 and ID.7, and other electric models, all shown in the fitment table on this page. For some versions the fit depends on motor code and build date, so check your car’s details against the fitment table on this page. Across the range, it covers versions from 109 kW to 250 kW. Fitting position: rear axle left and rear axle right. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part number is 186537. It replaces Audi part numbers 1EA 505 145 K and 1EA 505 145 R. The same part is also used by CUPRA, Ford, Skoda and VW. Check the part number on your existing part matches before ordering.
Fitting Advice
Bushes are pressed in, so a press or suitable tool is needed. Tighten the bolts with the car’s weight on its wheels and check the alignment afterwards. Replacing bushes on both sides keeps the handling balanced. Check the other suspension bushes while the car is raised.
Specifications
| Specification | Value |
|---|---|
| Height or Thickness | 86 mm |
| Inner Diameter | 20 mm |
| Material | Rubber / metal |
| Outer Diameter | 99 mm |
| Fitting Position | Rear axle left, rear axle right, rear |
| Part Number | Febi 186537 |
Fits The Following Models
| Make | Model | Version | Notes |
|---|---|---|---|
| Audi | Q4 e-tron (F4) 2021 on | 150 kW / 204 hp | Built up to October 2021 |
| Audi | Q4 e-tron (F4) quattro 2021 on | 195 kW / 265 hp | Built up to October 2021 |
| Audi | Q4 e-tron (F4) quattro 2021 on | 220 kW / 299 hp | Motor code EBJA; Built up to October 2021 |
| Audi | Q4 e-tron (F4) Sportback 2021 on | 150 kW / 204 hp | Built up to October 2021 |
| Audi | Q4 e-tron (F4) Sportback 2021 on | 125 kW / 170 hp | Built up to October 2021 |
| Audi | Q4 e-tron (F4) Sportback quattro 2021 on | 220 kW / 299 hp | Built up to October 2021 |
| CUPRA | Born (K1) 2021 on | 110 kW / 150 hp | |
| CUPRA | Born (K1) 2021 on | 150 kW / 204 hp | Motor code EBJC |
| Ford | Capri IV (24) 2024 on | 125 kW / 170 hp | |
| Ford | Capri IV (24) 2024 on | 210 kW / 286 hp | |
| Ford | Capri IV (24) AWD 2024 on | 250 kW / 340 hp | |
| Ford | Explorer EV (24) 2023 on | 125 kW / 170 hp | |
| Ford | Explorer EV (24) 2023 on | 210 kW / 286 hp | |
| Ford | Explorer EV (24) AWD 2023 on | 250 kW / 340 hp | |
| Skoda | Elroq 4×4 2025 on | 250 kW / 340 hp | |
| Skoda | Elroq 50 2024 on | 125 kW / 170 hp | |
| Skoda | Elroq 60 2024 on | 150 kW / 204 hp | |
| Skoda | Elroq 85 2024 on | 210 kW / 286 hp | |
| Skoda | Enyaq iV 4×4 2021 on | 195 kW / 265 hp | Built up to November 2021 |
| Skoda | Enyaq iV 2020 on | 109 kW / 148 hp | Built up to November 2021 |
| Skoda | Enyaq iV 2020 on | 132 kW / 179 hp | Built up to November 2021 |
| Skoda | Enyaq iV 2020 on | 150 kW / 204 hp | Motor code EBJA, EBJC; Built up to November 2021 |
| Skoda | Enyaq iV Coupe 4×4 2021 on | 220 kW / 299 hp | |
| Volkswagen | ID.3 (E1) 2019 on | 110 kW / 150 hp | Built up to September 2021 |
| Volkswagen | ID.3 (E1) 2019 on | 150 kW / 204 hp | Built up to September 2021 |
| Volkswagen | ID.4 (E2) 2020 on | 125 kW / 170 hp | Motor code EBJA; Built up to October 2021 |
| Volkswagen | ID.4 (E2) 2020 on | 109 kW / 148 hp | Built up to October 2021 |
| Volkswagen | ID.4 (E2) 2020 on | 150 kW / 204 hp | Built up to October 2021 |
| Volkswagen | ID.4 4motion (E2) 2021 on | 220 kW / 299 hp | Motor code EBJA; Built up to October 2021 |
| Volkswagen | ID.5 (E3) 2021 on | 128 kW / 174 hp | Built up to October 2021 |
| Volkswagen | ID.5 (E3) 2021 on | 150 kW / 204 hp | Built up to October 2021 |
| Volkswagen | ID.5 4motion (E3) 2021 on | 220 kW / 299 hp | Motor code EBJA; Built up to October 2021 |
| Volkswagen | ID.7 (ED) 2023 on | 210 kW / 286 hp | Motor code EDFA; Built up to November 2023 |
Explore More Parts
- All Audi Q4 e-tron Parts
- All Audi Q4 Sportback e-tron Parts
- All CUPRA Born Parts
- All Ford Capri Parts
- All Ford Explorer Parts
- All Skoda Elroq Parts
- All Suspension Bushes
Audi Q4 e-tron Rear Axle Beam Mount FAQs
Will this rear axle beam mount fit my Audi Q4 e-tron?
It fits the Audi Q4 e-tron and Q4 Sportback e-tron, Ford Explorer EV and Capri IV, VW ID.3, ID.4, ID.5 and ID.7, and other electric models, all shown in the fitment table. Check the part number on your existing part matches before ordering.
What part number does the Audi Q4 e-tron rear axle beam mount replace?
It replaces Audi part numbers 1EA 505 145 K and 1EA 505 145 R. The same part is also used by CUPRA, Ford, Skoda and VW.
What are the signs of a worn suspension bush?
Clunks over bumps, vague handling and uneven tyre wear are common signs.
Do I need a press to fit this bush?
Usually yes. Bushes are a press fit, so a press or bush tool is needed.
Who makes this rear axle beam mount?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this rear axle beam mount?
Specifications at a glance: height or thickness 86 mm, inner diameter 20 mm, material rubber / metal and outer diameter 99 mm.
Which Q4 e-tron does it suit?
The fitment table lists the versions and build dates it suits.


Reviews
There are no reviews yet.