Ford E-Tourneo Custom Front Brake Pad Set – Also fits E-Transit Custom
This Blue Print brake pad set is a replacement part for the front axle of the Ford E-Tourneo Custom and Ford E-Transit Custom, the electric versions of the Custom van and people carrier from 2024 on. It presses against the brake disc when you brake, providing the friction that slows and stops the vehicle. The set comes with bolts and has a wear warning contact.
Regenerative braking takes much of the load on an electric vehicle, so the pads last longer, but they still wear and they can also glaze or corrode when they are not used firmly. Thin, glazed or contaminated pads lead to squealing, a longer pedal, uneven braking and a warning on the dashboard. Worn pads can also damage the disc. A van carrying passengers or a full load needs more braking force to stop, so pads in good condition matter even more.
Each pad is 163.1 mm long and 63.2 mm wide, with a thickness of 18.9 mm including the backing plate. The pads carry ECE R90 approval, the European standard for replacement brake pads.
The Blue Print part number is ADBP420252.
Blue Print is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
It fits the Ford E-Tourneo Custom (24, 2024 on) and Ford E-Transit Custom (24, 2024 on). Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Friction material matched to the original pad
- Correct backing plate shape for a precise fit in the caliper
- Low-noise design for quiet stopping
- Supplied as a full axle set
Specifications
- Fitting position: front axle
- Approval: ECE R90
- Brake Lining Thickness (incl. Backing Plate): 18,9 mm
- Length: 163,1 mm
- Wear warning contact: with wear warning contact
- Width: 63,2 mm
Replaces Ford part numbers 2 775 877, KTPZ31-2K021-AD, 2 686 635, 2 710 052, 2 717 802 and KTPZ31-2K021-AA, as well as KTPZ31-2K021-AB and KTPZ31-2K021-AC.
Installation
Brake pads are always replaced as a full axle set. Check the disc condition and thickness at the same time, clean and lightly lubricate the pad contact points, and wind the caliper pistons back carefully. Connect the wear warning contact, use the bolts supplied and tighten them to the correct torque. Bed the new pads in with a few gentle stops. If you are unsure, have a qualified technician fit them.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting position | front axle |
| Approval | ECE R90 |
| Brake Lining Thickness (incl. Backing Plate) | 18,9 mm |
| Length | 163,1 mm |
| Wear warning contact | with wear warning contact |
| Width | 63,2 mm |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Ford | E-Tourneo Custom (24) 2024 – | (E) – 100 kW / 136 hp |
| Ford | E-Tourneo Custom (24) 2024 – | (E) – 160 kW / 218 hp |
| Ford | E-Tourneo Custom (24) 2024 – | (E) – 210 kW / 286 hp |
| Ford | E-Transit VI Custom (24) 2024 – | (E) – 100 kW / 136 hp |
| Ford | E-Transit VI Custom (24) 2024 – | (E) – 160 kW / 218 hp |
| Ford | E-Transit VI Custom (24) 2024 – | (E) – 210 kW / 286 hp |
Ford E-Tourneo Custom Front Brake Pad Set – Also fits E-Transit Custom FAQs
Which part numbers does it replace?
It replaces 2 775 877, KTPZ31-2K021-AD, 2 686 635, 2 710 052, 2 717 802, KTPZ31-2K021-AA, KTPZ31-2K021-AB and KTPZ31-2K021-AC.
Is this a full axle set?
Yes. The set contains the pads needed for both wheels on one axle.
How often should brake pads be changed on an electric car?
There is no fixed mileage. Check them at each service. They often last longer on electric cars because of regenerative braking.
Do I need to replace the discs as well?
Only if the discs are worn below minimum thickness, scored or corroded. Check them when fitting new pads.
Will it fit my Ford E-Tourneo Custom?
It fits the Ford E-Tourneo Custom (24, 2024 on) and Ford E-Transit Custom (24, 2024 on). Compare the part number on your existing part.
Is this a genuine Ford part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.