GWM ORA Funky Cat Front Brake Pad Set, 134.8 mm Length
This Febi brake pad set fits the GWM ORA Funky Cat. It fits the front axle. It presses against the brake disc when you brake, providing the friction that slows and stops the car.
Regenerative braking takes much of the load on an electric car, so the pads last longer, but they still wear and they can also glaze or corrode when they are not used firmly. Thin, glazed or contaminated pads lead to squealing, a longer pedal, uneven braking and a warning on some cars. Worn pads can also damage the disc. A fresh pad set restores strong, predictable braking and protects the discs.
The Febi part number is 1000365, and the same part is also sold as Blue Print ADBP420192.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
It fits the GWM ORA Funky Cat (ES, 2022 on). Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Friction material matched to the original pad
- Correct backing plate shape for a precise fit in the caliper
- Low-noise design for quiet stopping
- Supplied as a full axle set
Specifications
- Fitting position: front axle
- Approval: ECE R90
- Brake Lining Thickness (incl. Backing Plate): 15,5 mm
- Length: 134,8 mm
- Wear warning contact: with acoustic wear warning
- Width: 61,8 mm
Replaces Great Wall and GWM ORA part numbers 3501107XNW01A and 3501270XGW02A.
Installation
Brake pads are always replaced as a full axle set. Check the disc condition and thickness at the same time, clean and lightly lubricate the pad contact points, and wind the caliper piston back carefully. Some cars need the electric parking brake put into service mode before rear pads can be changed. Bed the new pads in with a few gentle stops. If you are unsure, have a qualified technician fit them.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting position | front axle |
| Approval | ECE R90 |
| Brake Lining Thickness (incl. Backing Plate) | 15,5 mm |
| Length | 134,8 mm |
| Wear warning contact | with acoustic wear warning |
| Width | 61,8 mm |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Great Wall | ORA (ES) 2022 – | (E) – 126 kW / 171 hp |
| GWM ORA | ES11 (CC7000) 2020 – | (E) – 135 kW / 184 hp |
| GWM ORA | ES11 (CC7000) 2020 – | (E) – 105 kW / 143 hp |
GWM ORA Funky Cat Front Brake Pad Set, 134.8 mm Length FAQs
Which part numbers does it replace?
It replaces 3501107XNW01A and 3501270XGW02A.
Is this a full axle set?
Yes. The set contains the pads needed for both wheels on one axle.
How often should brake pads be changed on an electric car?
There is no fixed mileage. Check them at each service. They often last longer on electric cars because of regenerative braking.
Do I need to replace the discs as well?
Only if the discs are worn below minimum thickness, scored or corroded. Check them when fitting new pads.
Will it fit my GWM ORA Funky Cat?
It fits the GWM ORA Funky Cat (ES, 2022 on). Compare the part number on your existing part.
Is this a genuine GWM ORA part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.