GWM ORA Funky Cat Front Stabiliser Link
This Febi stabiliser link fits the GWM ORA Funky Cat and GWM ORA 03. It fits the front axle right, front axle left. It connects the anti-roll bar to the suspension, so the bar can keep the body level through corners.
Electric cars are heavy because of the battery, and that weight puts extra load on the suspension joints, including the stabiliser links. A worn link causes knocking or rattling over bumps, a vague feel when turning and more body roll. It is a common MOT advisory. A new link restores a tight connection between the anti-roll bar and the suspension, so the car feels settled again.
The Febi part number is 1001199, and the same part is also sold as Blue Print ADBP850084.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
It fits the GWM ORA Funky Cat (ES, 2022 on; ES11, 2022 on) and GWM ORA 03 (ES, 2024 on; ES11, 2023 on). Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Made to the original length and fixing points
- Sealed ball joints for long service life
- Supplied ready to fit
- Restores quiet, tight handling
Specifications
- Fitting position: front axle right, front axle left
- Length: 294 mm
- Material: steel
- Outside Thread: M12 x 1,25
- Thread Length: 26 mm
Replaces Great Wall and GWM ORA part numbers 2906126XGW02A, 2906102AGW02A, 2906102BGW02A and 2906102XGW02A.
Installation
Support the suspension so the anti-roll bar is not under load before removing the old link. Hold the ball-joint studs with a hex key while you tighten the nuts, and tighten them to the maker’s torque setting. Links are often replaced in pairs on the same axle for even handling. If you are unsure, have a qualified technician fit them.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting position | front axle right, front axle left |
| Length | 294 mm |
| Material | steel |
| Outside Thread | M12 x 1,25 |
| Thread Length | 26 mm |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Great Wall | ORA (ES) 2022 – | (E) – 126 kW / 171 hp |
| GWM ORA | Funky Cat (ES11) 2022 – | (E) – 126 kW / 171 hp |
| Great Wall | ORA 03 (ES) 2024 – | (E) – 126 kW / 171 hp |
| GWM ORA | 03 (ES11) 2023 – | (E) – 126 kW / 171 hp |
| GWM ORA | Good Cat (ES11) 2020 – | (E) – 105 kW / 143 hp |
GWM ORA Funky Cat Front Stabiliser Link FAQs
Which part numbers does it replace?
It replaces 2906126XGW02A, 2906102AGW02A, 2906102BGW02A and 2906102XGW02A.
Should I replace both links on the axle?
It is good practice. If one has worn, the other has done the same mileage and is likely to follow.
What does a worn stabiliser link sound like?
Usually a knock or rattle from the front or rear when driving over bumps at low speed.
Do I need a wheel alignment after fitting?
Not normally, as stabiliser links do not change the wheel angles.
Will it fit my GWM ORA Funky Cat?
It fits the GWM ORA Funky Cat (ES, 2022 on; ES11, 2022 on) and GWM ORA 03 (ES, 2024 on; ES11, 2023 on). Compare the part number on your existing part.
Is this a genuine GWM ORA part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.