Maxus eDeliver 3 Front Brake Disc
This Febi brake disc fits the Maxus eDeliver 3. It fits the front axle. It gives the brake pads a flat, true surface to clamp, turning the car’s movement into heat when you brake.
Electric cars slow down mostly through regenerative braking, so the friction brakes are used less often and less firmly than on other cars. That sounds kind, but it means discs can sit unused for long spells and pick up surface rust, scoring and uneven pad deposits.
The Febi part number is 193002, and the same part is also sold as Blue Print ADBP430206. It is sold in multiples of 2, as one axle needs 2, and the price shown is for one.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
It fits the Maxus eDeliver 3 (SV3, 2020 on; SH5, 2019 on). Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Made to the original size and fixing pattern
- Coated finish helps resist corrosion on the hub face and outer edge
- Balanced for smooth, judder-free braking
- Ready to fit after cleaning off the protective oil
Specifications
- Fitting position: front axle
- Brake Disc Thickness: 26 mm
- Brake Disc Type: vented
- Centring diameter: 65 mm
- Height or Thickness: 49 mm
- Minimum thickness of brake disc: 24 mm
- No. of Fixing Holes: 1
Replaces Maxus part number C00081697.
Installation
Brake discs should always be replaced in pairs on the same axle, and new brake pads are normally fitted at the same time. Clean the hub face so the disc sits perfectly flat, tighten the caliper carrier and wheel bolts to the maker’s torque settings, and bed the new pads in gently over the first few miles. If you are not confident working on brakes, ask a qualified technician to fit them.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting position | front axle |
| Brake Disc Thickness | 26 mm |
| Brake Disc Type | vented |
| Centring diameter | 65 mm |
| Height or Thickness | 49 mm |
| Minimum thickness of brake disc | 24 mm |
| No. of Fixing Holes | 1 |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Maxus | eDELIVER 3 (SV3) 2020 – | (E) – 90 kW / 122 hp |
| Maxus | EV30 (SH5) 2019 – | (E) – 100 kW / 136 hp |
| Maxus | EV30 (SH5) 2019 – | (E) – 70 kW / 95 hp |
Maxus eDeliver 3 Front Brake Disc FAQs
Which part numbers does it replace?
It replaces C00081697.
Should I replace both discs on the axle?
Yes. Discs should be replaced as a pair on the same axle so the car brakes evenly from side to side.
Do I need new brake pads with new discs?
It is strongly recommended. Old pads are bedded to the worn disc surface and will not give full contact with a new disc.
Why do discs wear on an electric car when regen does most of the braking?
Low use lets rust and deposits build up on the disc surface. This causes uneven wear, noise and poor braking even when the disc is not thin.
Will it fit my Maxus eDeliver 3?
It fits the Maxus eDeliver 3 (SV3, 2020 on; SH5, 2019 on). Compare the part number on your existing part.
Is this a genuine Maxus part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.