Mercedes-Benz EQA Auxiliary Water Pump
This Mercedes-Benz EQA auxiliary water pump circulates coolant around the electric car’s cooling system, helping to manage battery, motor and electronics temperature. It is electrically driven, so it can run when the car is charging or parked. It is a 12 V electric pump with a three-pin connection.
Specifications at a glance: no. of connections 3, operating mode electric and voltage 12 V.
Signs Your Auxiliary Water Pump Needs Replacing
Signs of a failing pump include temperature or cooling warnings, reduced charging speed, a buzzing or whining noise and a fault code for the pump circuit. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car. If in doubt, ask your garage to check it at the next service.
Fitment
It fits the Mercedes-Benz EQA, EQB, EQC, EQV, eSprinter and eVito. Across the range, it covers versions from 85 kW to 300 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part number is 182803. It replaces Mercedes-Benz part numbers 000 500 17 00, 000 500 19 00, 000 500 23 00 and the other numbers listed on this page. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Use the coolant type the maker specifies and bleed the cooling system afterwards, which may need a diagnostic tool. Use the correct coolant type. Clear any fault codes after fitting. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you. Keeping on top of worn parts also helps your car sail through its next MOT. Take a photo of the old part before you remove it, so you can compare it with the new one.
Specifications
| Specification | Value |
|---|---|
| No. of Connections | 3 |
| Operating Mode | Electric |
| Voltage | 12 V |
| Part Number | Febi 182803 |
Fits The Following Models
| Make | Model | Version |
|---|---|---|
| Mercedes-Benz | eSprinter (910) 2020 to 2023 | 85 kW / 116 hp |
| Mercedes-Benz | eVito (447) 2019 on | 85 kW / 116 hp |
| Mercedes-Benz | EQA (243) 2021 on | EQA 350 4Matic – 215 kW / 292 hp |
| Mercedes-Benz | EQA (243) 2021 on | EQA 300 4Matic – 168 kW / 228 hp |
| Mercedes-Benz | EQA (243) 2021 on | EQA 250+ – 140 kW / 190 hp |
| Mercedes-Benz | EQA (243) 2021 on | EQA 250 – 140 kW / 190 hp |
| Mercedes-Benz | EQB (243) 2021 on | EQB 350 4Matic – 215 kW / 292 hp |
| Mercedes-Benz | EQB (243) 2021 on | EQB 300 4Matic – 168 kW / 228 hp |
| Mercedes-Benz | EQB (243) 2021 on | EQB 250+ – 140 kW / 190 hp |
| Mercedes-Benz | EQB (243) 2021 on | EQB 250 – 140 kW / 190 hp |
| Mercedes-Benz | EQC (293) 2019 on | EQC 350 4Matic – 300 kW / 408 hp |
| Mercedes-Benz | EQC (293) 2019 on | EQC 400 4Matic – 300 kW / 408 hp |
| Mercedes-Benz | EQV (447) 2020 on | EQV 250 – 150 kW / 204 hp |
| Mercedes-Benz | EQV (447) 2020 on | EQV 300 – 150 kW / 204 hp |
Explore More Parts
- All Mercedes-Benz eSprinter Parts
- All Mercedes-Benz eVito Parts
- All Mercedes-Benz EQA Parts
- All Mercedes-Benz EQB Parts
- All Mercedes-Benz EQC Parts
- All Mercedes-Benz EQV Parts
- All Cooling System
Mercedes-Benz EQA Auxiliary Water Pump FAQs
Will this auxiliary water pump fit my Mercedes-Benz EQA?
It fits the Mercedes-Benz EQA, EQB, EQC, EQV, eSprinter and eVito. Check the part number on your existing part matches before ordering.
What part number does the Mercedes-Benz EQA auxiliary water pump replace?
It replaces Mercedes-Benz part numbers 000 500 17 00, 000 500 19 00, 000 500 23 00 and the other numbers listed on this page.
What does an auxiliary water pump do?
It circulates coolant through the cooling system, even when the car is parked or charging.
Does the cooling system need bleeding after fitting?
Yes. Follow the car maker’s bleeding procedure.
Who makes this auxiliary water pump?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this auxiliary water pump?
Specifications at a glance: no. of connections 3, operating mode electric and voltage 12 V.
What are the signs of a failing pump?
Cooling warnings, reduced power, slower charging or poor heating.


Reviews
There are no reviews yet.