Mercedes-Benz eVito Front Control Arm Front Bush
This Mercedes-Benz eVito front control arm front bush is the rubber and metal mounting that holds the suspension arm in place while absorbing road shocks and vibration. The rubber hardens and cracks with age, and the extra weight of an electric car adds to the load. It is the front bush of the front lower control arm. The front control arm bush locates the arm and absorbs shocks.
Specifications at a glance: thickness 60 mm, inner diameter 14.6 mm, material rubber/metal and outer diameter 70 mm.
Signs Your Front Control Arm Front Bush Needs Replacing
Signs of a worn bush include a clunk over bumps or when braking, a vague or wandering feel at speed, uneven tyre wear and visible cracks or splits in the rubber. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the Mercedes-Benz eVito and EQV. In detail, that covers the Mercedes-Benz eVito (447) 2019 on and Mercedes-Benz EQV (447) 2020 on. Across the range, it covers versions from 85 kW to 150 kW. Fitting position: front axle left and front axle right. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part number is 109140. It replaces Mercedes-Benz part numbers 447 330 14 07, 447 330 15 07, 447 330 75 00 and the other numbers listed on this page. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
A press or bush tool is needed. Tighten the bolts with the van at ride height, then have the wheel alignment checked. If the van has driver assistance systems, sensor calibration may be needed after fitting. Replacing bushes on both sides keeps the handling balanced. Check the other suspension bushes while the car is raised.
Specifications
| Specification | Value |
|---|---|
| Thickness | 60 mm |
| Inner Diameter | 14.6 mm |
| Material | Rubber/metal |
| Outer Diameter | 70 mm |
| Fitting Position | Front axle left, front axle right, front |
| Part Number | Febi 109140 |
Fits The Following Models
| Make | Model | Version |
|---|---|---|
| Mercedes-Benz | eVito (447) 2019 on | 85 kW / 116 hp |
| Mercedes-Benz | EQV (447) 2020 on | EQV 250 – 150 kW / 204 hp |
| Mercedes-Benz | EQV (447) 2020 on | EQV 300 – 150 kW / 204 hp |
Explore More Parts
Mercedes-Benz eVito Front Control Arm Front Bush FAQs
Will this front control arm front bush fit my Mercedes-Benz eVito?
It fits the Mercedes-Benz eVito and EQV. Check the part number on your existing part matches before ordering.
What part number does the Mercedes-Benz eVito front control arm front bush replace?
It replaces Mercedes-Benz part numbers 447 330 14 07, 447 330 15 07, 447 330 75 00 and the other numbers listed on this page.
What are the signs of a worn suspension bush?
Clunks over bumps, vague handling and uneven tyre wear are common signs.
Do I need a press to fit this bush?
Usually yes. Bushes are a press fit, so a press or bush tool is needed.
Who makes this front control arm front bush?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this front control arm front bush?
Specifications at a glance: thickness 60 mm, inner diameter 14.6 mm, material rubber/metal and outer diameter 70 mm.
Will the van need calibrating?
If the van has driver assistance systems, sensor calibration may be needed after fitting.
Reviews
There are no reviews yet.