Mercedes-Benz eVito Rear Anti-roll Bar Bush
This Mercedes-Benz eVito rear anti-roll bar bush holds the anti-roll bar to the car body or subframe, letting it twist while keeping it firmly located. The rubber wears and hardens over time, which lets the bar move in its clamp.
Specifications at a glance: thickness 48 mm, inner diameter 12 mm, length 32 mm and material rubber.
Signs Your Rear Anti-roll Bar Bush Needs Replacing
Signs of worn anti-roll bar bushes include a knocking or creaking noise over bumps, especially at low speed, and a slightly vaguer feel in corners. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car. If in doubt, ask your garage to check it at the next service.
Fitment
It fits the Mercedes-Benz eVito and EQV. In detail, that covers the Mercedes-Benz eVito (447) 2019 on and Mercedes-Benz EQV (447) 2020 on. Across the range, it covers versions from 85 kW to 150 kW. Fitting position: rear axle. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part number is 104486. It replaces Mercedes-Benz part number 447 326 04 81. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Easy to fit with basic tools. Clean the bar where the bush sits and replace both sides together. Check the anti-roll bar links at the same time. A quiet suspension is noticeable in an electric car. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you. Keeping on top of worn parts also helps your car sail through its next MOT. Take a photo of the old part before you remove it, so you can compare it with the new one.
Specifications
| Specification | Value |
|---|---|
| Thickness | 48 mm |
| Inner Diameter | 12 mm |
| Length | 32 mm |
| Material | Rubber |
| Outer Diameter | 32 mm |
| Width | 32 mm |
| Fitting Position | Rear axle |
| Part Number | Febi 104486 |
Fits The Following Models
| Make | Model | Version |
|---|---|---|
| Mercedes-Benz | eVito (447) 2019 on | 150 kW / 204 hp |
| Mercedes-Benz | eVito (447) 2019 on | 85 kW / 116 hp |
| Mercedes-Benz | EQV (447) 2020 on | EQV 250 – 150 kW / 204 hp |
| Mercedes-Benz | EQV (447) 2020 on | EQV 300 – 150 kW / 204 hp |
Explore More Parts
Mercedes-Benz eVito Rear Anti-roll Bar Bush FAQs
Will this rear anti-roll bar bush fit my Mercedes-Benz eVito?
It fits the Mercedes-Benz eVito and EQV. Check the part number on your existing part matches before ordering.
What part number does the Mercedes-Benz eVito rear anti-roll bar bush replace?
It replaces Mercedes-Benz part number 447 326 04 81.
What does an anti-roll bar bush do?
It holds the anti-roll bar to the car while letting it twist as the car corners.
Should I replace both bushes?
Yes. Fitting both sides keeps the bar clamped evenly.
Who makes this rear anti-roll bar bush?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this rear anti-roll bar bush?
Specifications at a glance: thickness 48 mm, inner diameter 12 mm, length 32 mm, material rubber, outer diameter 32 mm and width 32 mm.
Reviews
There are no reviews yet.