ABS Wheel Speed Sensor – DS 3 Crossback E-Tense
This ABS wheel speed sensor has a 990 mm cable and a two-pin plug. The fitting position depends on the vehicle.
The ABS sensor tells the car how fast each wheel is turning. A faulty sensor turns on the ABS and stability warning lights, which is an MOT failure, and can stop the ABS working. Check the wiring and the reluctor ring for damage when fitting. A fault code reader shows which wheel sensor has failed, so you only replace the one that is faulty. Dirt or rust on the sensor tip can also cause a fault, so clean the mounting before fitting the new sensor. The ABS and stability systems will not work properly until the faulty sensor is replaced. The specifications below show the size and type, so you can compare them with your old part before ordering. The fitment table lists every electric version the bilstein group parts finder shows for this part, with its power output.
This is Febi part number 102248, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The bilstein group parts finder lists this ABS sensor for the DS 3 Crossback E-Tense (2018 on) 100 kW. The table shows every version listed. Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- 990 mm cable
- Two-pin plug
- Fitting position depends on the vehicle
- Made by the bilstein group
Specifications
- Cable Length: 990 mm
- No. of Connections: 2
- Fitting Position: Vehicle-dependent installation positions
- Part Number: Febi 102248
Replaces DS part number 4545.J9.
Installation
Professional installation recommended. Clean the sensor mounting, route the cable as the original and clear any fault codes afterwards.
Explore More Parts
| Attribute | Value |
|---|---|
| Cable Length | 990 mm |
| No. of Connections | 2 |
| Fitting Position | Vehicle-dependent installation positions |
| Part Number | Febi 102248 |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| DS | DS3 II Crossback 2018 – | (E) – 100 kW / 136 hp |
ABS Wheel Speed Sensor – DS 3 Crossback E-Tense FAQs
Which part numbers does it replace?
It replaces DS part number 4545.J9.
How long is the cable?
990 mm.
What are the signs of a faulty ABS sensor?
The ABS and stability warning lights come on.
Will it fit my DS 3 Crossback E-Tense?
The parts finder lists it for the DS 3 Crossback E-Tense. Compare the part number on your existing part, or send us your registration and we will confirm.
Is this a genuine DS part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.