Audi Q4 e-tron Front Strut Top Mount Kit with Bearing
This Audi Q4 e-tron front strut top mount kit with bearing holds the top of the suspension strut to the car body, absorbing vibration and letting the strut turn smoothly where it carries a bearing. A heavy electric car puts extra load on the top mounts, and the rubber can split or sag over time.
Specifications at a glance: material rubber / metal.
Signs Your Strut Top Mount Needs Replacing
Signs of a worn top mount include a knock or clunk over bumps, a creaking or graunching noise when turning the steering, and heavier or notchy steering. Cracked or sagging rubber is a clear sign it needs replacing. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the Audi Q4 e-tron and Q4 Sportback e-tron, VW ID.3, ID.4 and ID.5, CUPRA Born, Skoda Enyaq and Enyaq Coupe, and other electric models, all shown in the fitment table on this page. For some versions the fit depends on motor code, so check your car’s details against the fitment table on this page. Across the range, it covers versions from 107 kW to 250 kW. Fitting position: front axle left and front axle right. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part number is 181309. It replaces Audi part numbers 1EA 412 331 B, 5Q0 412 249 E and 5Q0 412 249 F. The same part is also used by CUPRA, Skoda and VW. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
The strut has to come out and spring compressors are needed. Have the wheel alignment checked afterwards. A spring compressor is essential for this job. Fitting new mounts when replacing shock absorbers saves labour.
Specifications
| Specification | Value |
|---|---|
| Material | Rubber / metal |
| Fitting Position | Front axle left, front axle right |
| Part Number | Febi 181309 |
Fits The Following Models
| Make | Model | Version | Notes |
|---|---|---|---|
| Audi | Q4 e-tron (F4) 2021 on | 150 kW / 204 hp | |
| Audi | Q4 e-tron (F4) quattro 2021 on | 195 kW / 265 hp | |
| Audi | Q4 e-tron (F4) quattro 2021 on | 220 kW / 299 hp | |
| Audi | Q4 e-tron (F4) Sportback 2021 on | 150 kW / 204 hp | |
| Audi | Q4 e-tron (F4) Sportback 2021 on | 125 kW / 170 hp | |
| Audi | Q4 e-tron (F4) Sportback quattro 2021 on | 220 kW / 299 hp | |
| CUPRA | Born (K1) 2021 on | 110 kW / 150 hp | |
| CUPRA | Born (K1) 2021 on | 150 kW / 204 hp | Motor code EBJC |
| Skoda | Elroq 4×4 2025 on | 250 kW / 340 hp | |
| Skoda | Elroq 50 2024 on | 125 kW / 170 hp | |
| Skoda | Elroq 60 2024 on | 150 kW / 204 hp | |
| Skoda | Elroq 85 2024 on | 210 kW / 286 hp | |
| Skoda | Enyaq iV 4×4 2021 on | 195 kW / 265 hp | |
| Skoda | Enyaq iV 4×4 2021 on | 210 kW / 286 hp | |
| Skoda | Enyaq iV 4×4 2021 on | 250 kW / 340 hp | |
| Skoda | Enyaq iV 2020 on | 109 kW / 148 hp | |
| Skoda | Enyaq iV 2020 on | 132 kW / 179 hp | |
| Skoda | Enyaq iV 2020 on | 150 kW / 204 hp | Motor code EBJA, EBJC |
| Skoda | Enyaq iV Coupe 4×4 2021 on | 220 kW / 299 hp | |
| Skoda | Enyaq iV Coupe 2021 on | 132 kW / 179 hp | |
| Volkswagen | ID.3 (E1) 2019 on | 107 kW / 145 hp | |
| Volkswagen | ID.3 (E1) 2019 on | 110 kW / 150 hp | |
| Volkswagen | ID.3 (E1) 2019 on | 150 kW / 204 hp | |
| Volkswagen | ID.4 (E2) 2020 on | 125 kW / 170 hp | Motor code EBJA |
| Volkswagen | ID.4 (E2) 2020 on | 109 kW / 148 hp | |
| Volkswagen | ID.4 (E2) 2020 on | 150 kW / 204 hp | |
| Volkswagen | ID.4 4motion (E2) 2021 on | 220 kW / 299 hp | Motor code EBJA |
| Volkswagen | ID.5 (E3) 2021 on | 128 kW / 174 hp | |
| Volkswagen | ID.5 (E3) 2021 on | 150 kW / 204 hp | |
| Volkswagen | ID.5 4motion (E3) 2021 on | 220 kW / 299 hp | Motor code EBJA |
Explore More Parts
- All Audi Q4 e-tron Parts
- All Audi Q4 Sportback e-tron Parts
- All CUPRA Born Parts
- All Skoda Elroq Parts
- All Skoda Enyaq iV Parts
- All Skoda Enyaq Coupé iV Parts
- All Strut Mounts
Audi Q4 e-tron Front Strut Top Mount Kit with Bearing FAQs
Will this front strut top mount kit with bearing fit my Audi Q4 e-tron?
It fits the Audi Q4 e-tron and Q4 Sportback e-tron, VW ID.3, ID.4 and ID.5, CUPRA Born, Skoda Enyaq and Enyaq Coupe, and other electric models, all shown in the fitment table. Check the part number on your existing part matches before ordering.
What part number does the Audi Q4 e-tron front strut top mount kit with bearing replace?
It replaces Audi part numbers 1EA 412 331 B, 5Q0 412 249 E and 5Q0 412 249 F. The same part is also used by CUPRA, Skoda and VW.
What are the signs of a worn strut top mount?
Knocks over bumps, creaking when steering and a notchy feel are common signs.
Should I replace both top mounts?
It is recommended, so both sides of the car feel the same.
Who makes this front strut top mount kit with bearing?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this front strut top mount kit with bearing?
Specifications at a glance: material rubber / metal.
Is the bearing included?
Yes, the kit includes the ball bearing.


Reviews
There are no reviews yet.