BMW i3 Front Stabiliser Link
This BMW i3 front stabiliser link connects the anti-roll bar to the suspension, helping the car stay flat and stable in corners. Each end has a small ball joint, and those joints wear with every bump. It lets the bar keep the body level through corners.
Specifications at a glance: length 235 mm, thread M10 x 1.5, thread length 25 mm and spanner size 15 mm.
Signs Your Front Stabiliser Link Needs Replacing
The most common sign of a worn link is a knocking or rattling noise over bumps and uneven roads, often from one corner of the car. Play in the joints or a split boot is an MOT advisory or failure. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the BMW i3. Choose the version you need from the options above. Across the range, it covers versions from 125 kW to 135 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part numbers are 177416 (left) and 177415 (right). It replaces BMW part numbers 31 30 6 862 857 and 31 30 6 862 858. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Hold the ball joint pin with a spanner while undoing the nuts, and tighten the new nuts with the suspension at its normal ride height. Check the anti-roll bar bushes at the same time. It is one of the quickest suspension jobs to do. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you. Keeping on top of worn parts also helps your car sail through its next MOT.
Specifications
| Specification | Value |
|---|---|
| Fitting Position | Front Axle Left (177416) | Front Axle Right (177415) |
| Length | 235 mm |
| Thread | M10 x 1.5 |
| Thread Length | 25 mm |
| Spanner Size | 15 mm |
| Supplied with | Nuts |
| Part Number | Febi 177416 (left) | Febi 177415 (right) |
Fits The Following BMW Models
| Model | Version |
|---|---|
| i3 (I01) 2013 to 2022 | i3s – 135 kW / 184 hp |
| i3 (I01) 2013 to 2022 | i3s Range Extender – 135 kW / 184 hp |
| i3 (I01) 2013 to 2022 | i3 – 125 kW / 170 hp |
| i3 (I01) 2013 to 2022 | i3 Range Extender – 125 kW / 170 hp |
Explore More Parts
BMW i3 Front Stabiliser Link FAQs
Will this front stabiliser link fit my BMW i3?
It fits the BMW i3. Check the part number on your existing part matches before ordering.
What part number does the BMW i3 front stabiliser link replace?
It replaces BMW part numbers 31 30 6 862 857 and 31 30 6 862 858.
What does a worn anti-roll bar link sound like?
A knock or rattle over bumps, often from one corner of the car.
Should anti-roll bar links be replaced in pairs?
It is recommended, so the handling stays even.
Who makes this front stabiliser link?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this front stabiliser link?
Specifications at a glance: length 235 mm, thread M10 x 1.5, thread length 25 mm, spanner size 15 mm and supplied with Nuts.
Which side do I need?
Febi 177416 is for the front left and Febi 177415 is for the front right. Choose the side from the options above.

Reviews
There are no reviews yet.