BMW i3 Front Tie Rod with Tie Rod End
This BMW i3 front tie rod with tie rod end links the steering to the front wheel hub through a sealed ball joint, so the wheel turns accurately when you steer. Its rubber boot keeps the joint lubricated, and once that splits wear speeds up quickly.
Specifications at a glance: outside thread M14 x 1.5.
Signs Your Tie Rod End Needs Replacing
Typical signs of a worn tie rod end are a knock over bumps, play in the steering, a vague feel at speed and uneven wear on the inside or outside edge of the front tyres. Excessive play is an MOT failure. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the BMW i3. Choose the version you need from the options above. Across the range, it covers versions from 125 kW to 135 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part numbers are 180976 (left) and 180975 (right). It replaces BMW part numbers 32 21 6 851 409 and 32 21 6 851 410. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Count the turns as you remove the old tie rod to get the tracking close, then have a full wheel alignment done after fitting. Tighten all nuts to the BMW torque settings. Please if the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary. Check the inner tie rod and steering rack boot at the same time. A precise steering feel matters on a heavy electric car. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you.
Specifications
| Specification | Value |
|---|---|
| Fitting Position | Front Axle Left (180976) | Front Axle Right (180975) |
| Length | 442.5 mm (left) | 442 mm (right) |
| Outside Thread | M14 x 1.5 |
| Supplied with | Tie rod end and additional parts |
| Part Number | Febi 180976 (left) | Febi 180975 (right) |
Fits The Following BMW Models
| Model | Version |
|---|---|
| i3 (I01) 2013 to 2022 | i3s – 135 kW / 184 hp |
| i3 (I01) 2013 to 2022 | i3s Range Extender – 135 kW / 184 hp |
| i3 (I01) 2013 to 2022 | i3 – 125 kW / 170 hp |
| i3 (I01) 2013 to 2022 | i3 Range Extender – 125 kW / 170 hp |
Explore More Parts
BMW i3 Front Tie Rod with Tie Rod End FAQs
Will this front tie rod with tie rod end fit my BMW i3?
It fits the BMW i3. Check the part number on your existing part matches before ordering.
What part number does the BMW i3 front tie rod with tie rod end replace?
It replaces BMW part numbers 32 21 6 851 409 and 32 21 6 851 410.
What are the signs of a worn tie rod end?
A knock over bumps, play in the steering and uneven front tyre wear are common signs.
Do I need a wheel alignment after fitting?
Yes. Have the wheel alignment checked and set after fitting.
Who makes this front tie rod with tie rod end?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this front tie rod with tie rod end?
Specifications at a glance: outside thread M14 x 1.5.
Which side do I need?
Febi 180976 is for the front left and Febi 180975 is for the front right. Choose the side from the options above.

Reviews
There are no reviews yet.