BMW i3 Rear ABS Sensor – 34 52 6 865 795
This wheel speed (ABS) sensor reads the speed of the rear wheel on the BMW i3 and sends the signal to the ABS, traction control and stability systems. It fits either side of the rear axle and is sold singly.
A failing sensor usually brings on the ABS or stability warning lights, can make traction control cut in at the wrong moment and may affect regenerative braking. Damage often comes from corrosion at the connector or a cable that has been chafed or pulled during other work.
This is Febi part number 1001875, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification. Getting the right part first time saves time in the workshop, so compare the numbers on your old part with the ones listed here before you order. Keep the old part until the new one is fitted and working, so you can compare them side by side if you need to.
The table below shows the BMW i3 versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the BMW i3 (I01) 2013 – 2022: the i3 and i3s, with and without Range Extender. Compare the BMW part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Fits the left or right side
- 2-pin connector
- Restores ABS, traction and stability signals
- Direct replacement for the original sensor
- Febi quality from the bilstein group
Specifications
- Fitting Position: Rear axle left or right
- Cable Length: 620 mm
- No. of Connections: 2
- Part Number: Febi 1001875
Replaces BMW part numbers 34 52 6 865 795 and 34 52 6 794 378.
Installation
Professional installation recommended for best results. Clean the sensor bore before fitting, route the cable exactly as the original and secure it in every clip so it cannot rub on the wheel or suspension. Clear any stored faults afterwards.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Rear axle left or right |
| Cable Length | 620 mm |
| No. of Connections | 2 |
| Part Number | Febi 1001875 |
Fits The Following BMW Models
| Model | Submodel |
|---|---|
| i3 (I01) 2013 – 2022 | i3s – 135 kW / 184 hp |
| i3 (I01) 2013 – 2022 | i3s Range Extender – 135 kW / 184 hp |
| i3 (I01) 2013 – 2022 | i3 – 125 kW / 170 hp |
| i3 (I01) 2013 – 2022 | i3 Range Extender – 125 kW / 170 hp |
BMW i3 Rear ABS Sensor – 34 52 6 865 795 FAQs
Which part numbers does it replace?
Replaces BMW part numbers 34 52 6 865 795 and 34 52 6 794 378. The Febi part number is 1001875.
Does it fit the left or right side?
It fits either side of the rear axle. It is sold singly, so order two to replace both sides.
Why are there two rear sensors for the i3?
BMW used more than one rear sensor on the i3. Match the BMW part number on your old sensor to the one shown on this page.
Will it fit my BMW i3?
Listed in the parts finder for the BMW i3 (I01) 2013 – 2022: the i3 and i3s, with and without Range Extender. Check the notes in the fitment table and compare the BMW part number on your existing part.
Is this a genuine BMW part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.