Front Control Arm Rear Bush with Bracket – Mercedes-Benz EQV & eVito
This rubber and metal bush comes with its bracket and fits the rear mounting of the front lower control arm, on the left or right side. It is 60 mm thick with a 70.2 mm outside diameter and a 30.8 mm bore.
The rear control arm bush holds the arm in place under braking and acceleration. A split or soft bush causes knocking, a vague feel through the steering, pulling under braking and uneven tyre wear.
This is Febi part number 185389, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The bilstein group parts finder lists this control arm bush for electric versions of the Mercedes-Benz EQV and eVito. The table shows every version listed. Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Bracket included
- Rear bush of the front lower arm
- Fits left or right
- Made by the bilstein group
Specifications
- Attachment Point Diameter: 14.4 mm / 20.3 mm
- Thickness: 60 mm
- Inner Diameter: 30.8 mm
- Material: Rubber/metal
- Outer Diameter: 70.2 mm
- Fitting Position: Front axle left, front axle right, lower, rear
- Part Number: Febi 185389
Replaces Mercedes-Benz part numbers including 447 333 03 00, 447 330 75 00 SK2, 447 330 76 00 SK2. The full list is in the FAQs.
Installation
Professional installation recommended. Tighten the bolts with the van at ride height, then have the wheel alignment checked. If the van has driver assistance systems, sensor calibration may be needed after fitting, as the parts finder notes.
Explore More Parts
| Attribute | Value |
|---|---|
| Attachment Point Diameter | 14.4 mm / 20.3 mm |
| Thickness | 60 mm |
| Inner Diameter | 30.8 mm |
| Material | Rubber/metal |
| Outer Diameter | 70.2 mm |
| Fitting Position | Front axle left, front axle right, lower, rear |
| Part Number | Febi 185389 |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Mercedes-Benz | eVito (447) 2019 – | (E) – 150 kW / 204 hp |
| Mercedes-Benz | eVito (447) 2019 – | (E) – 85 kW / 116 hp |
| Mercedes-Benz | EQV (447) 2020 – | EQV 250 (E) – 150 kW / 204 hp |
| Mercedes-Benz | EQV (447) 2020 – | EQV 300 (E) – 150 kW / 204 hp |
Front Control Arm Rear Bush with Bracket – Mercedes-Benz EQV & eVito FAQs
Which part numbers does it replace?
It replaces Mercedes-Benz part numbers 447 333 03 00, 447 330 75 00 SK2, 447 330 76 00 SK2, 447 330 34 00 SK2 and 447 330 35 00 SK2.
Is the bracket included?
Yes, the bush comes fitted in its bracket.
Does it fit both sides?
Yes, it fits the front left or right side.
Will the van need calibrating?
If the van has driver assistance systems, sensor calibration may be needed after fitting, as the parts finder notes.
Will it fit my electric car?
The parts finder lists it for the Mercedes-Benz EQV and eVito. Compare the part number on your existing part, or send us your registration and we will confirm.
Is this a genuine Mercedes-Benz part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.