Kia EV6, EV9 & EV5 Rear Lower Control Arm Bush
This rubber and metal bush fits the outer rear end of the rear lower control arm on the Kia EV6, EV9 and EV5. It fits the rear left or rear right.
Replace the bush if the rubber is cracked, split or perished, or you hear knocks from the rear over bumps. A worn bush lets the rear wheel move out of line, which causes uneven tyre wear and can make the car feel unsettled at speed.
Choose Febi 41495 or Blue Print ADG080205 from the options. Both are made by the bilstein group to the same specification and replace Kia part numbers 55130-4D000, 55130-3U000 and 52760-2G000.
The EV6, EV9 and EV5 are heavy cars, so the rear suspension bushes carry a lot of load. A new bush is much cheaper than a complete arm when the arm is still sound.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The bilstein group parts finder lists it for the electric versions of the Kia EV5 2025 -, EV5 4×4 2025 -, EV6 2021 -, EV6 4×4 2021 -, EV9 2023 – and EV9 4×4 2023 -. The table below shows each power output. Compare the Kia part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Rubber and metal bush
- Fits the rear left or rear right
- Cheaper than a complete arm
- Choice of Febi or Blue Print
Specifications
- Fitting Position: Rear axle, left or right, lower, outer, rear
- Height: 59 mm
- Inner Diameter: 14 mm
- Outer Diameter: 44 mm
- Material: Rubber / metal
Replaces Kia part numbers 55130-4D000, 55130-3U000 and 52760-2G000.
Installation
Professional installation recommended. The bush is pressed into the arm. Tighten the bolt with the car at normal ride height and check the alignment. If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Rear axle, left or right, lower, outer, rear |
| Height | 59 mm |
| Inner Diameter | 14 mm |
| Outer Diameter | 44 mm |
| Material | Rubber / metal |
Fits The Following Kia Models
| Model | Submodel |
|---|---|
| EV5 2025 – | (E) – 160 kW / 218 hp |
| EV5 4×4 2025 – | (E) – 230 kW / 313 hp |
| EV6 2021 – | (E) – 125 kW / 170 hp |
| EV6 2021 – | (E) – 168 kW / 228 hp |
| EV6 4×4 2021 – | (E) – 239 kW / 325 hp |
| EV6 4×4 2021 – | (E) – 430 kW / 585 hp |
| EV9 2023 – | (E) – 150 kW / 204 hp |
| EV9 2023 – | (E) – 160 kW / 218 hp |
| EV9 4×4 2023 – | (E) – 283 kW / 385 hp |
Note from the parts finder: If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
Kia EV6, EV9 & EV5 Rear Lower Control Arm Bush FAQs
Which part numbers does it replace?
It replaces Kia part numbers 55130-4D000, 55130-3U000 and 52760-2G000.
Does it fit both sides?
Yes. It fits the rear left or rear right. Each bush is sold on its own.
Is it hard to fit?
It needs a press or bush tool, so it is best fitted by a garage.
Do I need an alignment?
Have the wheel alignment checked after replacing suspension bushes. If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
Will it fit my Kia EV6, EV9 or EV5?
The bilstein group parts finder lists it for the electric EV5 2025 – (160 kW / 218 hp); EV5 4×4 2025 – (230 kW / 313 hp); EV6 2021 – (125 kW / 170 hp and 168 kW / 228 hp); EV6 4×4 2021 – (239 kW / 325 hp and 430 kW / 585 hp); EV9 2023 – (150 kW / 204 hp and 160 kW / 218 hp); EV9 4×4 2023 – (283 kW / 385 hp). If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary. Compare the Kia part number on your existing part before ordering.
Is this a genuine Kia part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.