MG Marvel R Wheel Bearing Kit with Hub & ABS Sensor Ring – Fits Front or Rear
This wheel bearing kit for the MG Marvel R comes with the wheel hub, an ABS sensor ring and the additional fitting parts. The angular ball bearing is integrated into the hub. The same kit fits the front and rear axles on both the left and right sides.
A worn wheel bearing usually makes a humming, rumbling or growling noise that rises with road speed and can change when cornering. You may also feel play in the wheel or vibration, and a damaged sensor ring can bring on the ABS warning light.
This is Febi part number 39916, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The table below shows the MG versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the MG Marvel R (EP) 2021 – (132 kW) and the Marvel R 4×4 (EP) 2021 – (212 kW). Compare the MG part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Bearing integrated in the hub
- Integrated ABS sensor ring
- Fits front and rear, left and right
- Includes additional fitting parts
- Febi quality from the bilstein group
Specifications
- Fitting Position: Front and rear axle, left and right
- Bearing Type: Angular ball bearing, integrated in wheel hub
- ABS Sensor Ring: Integrated
- Inner Diameter: 36 mm
- Outer Diameter: 91 mm
- Outer Diameter 1: 67.4 mm
- Outer Diameter 2: 157 mm
- Width: 42 mm
- Wheel Studs: 5
- Pitch Circle Diameter: 120 mm
- Part Number: Febi 39916
Replaces MG part number 13507374.
Installation
Professional installation recommended. Tighten the hub bolts and axle nut to the vehicle maker’s torque settings, keep the ABS sensor ring clean and undamaged, and check the ABS warning light is off after fitting.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front and rear axle, left and right |
| Bearing Type | Angular ball bearing, integrated in wheel hub |
| ABS Sensor Ring | Integrated |
| Inner Diameter | 36 mm |
| Outer Diameter | 91 mm |
| Outer Diameter 1 | 67.4 mm |
| Outer Diameter 2 | 157 mm |
| Width | 42 mm |
| Wheel Studs | 5 |
| Pitch Circle Diameter | 120 mm |
| Part Number | Febi 39916 |
Fits The Following MG Models
| Model | Submodel |
|---|---|
| Marvel R (EP) 2021 – | (E) – 132 kW / 179 hp |
| Marvel R 4×4 (EP) 2021 – | (E) – 212 kW / 288 hp |
MG Marvel R Wheel Bearing Kit with Hub & ABS Sensor Ring – Fits Front or Rear FAQs
Which part numbers does it replace?
Replaces MG part number 13507374. The Febi part number is 39916.
Does it fit the front and rear?
Yes. The parts finder lists the same kit for the front and rear axles, left and right. It is sold as one kit, so order one for each wheel you are replacing.
Is the ABS sensor ring included?
Yes. The ABS sensor ring is integrated into the kit. The ABS sensor itself is not included.
Should I replace both sides?
Wheel bearings are usually replaced one at a time as they wear, but if the bearing on the other side of the same axle is also noisy, replace it at the same time.
Will it fit my MG Marvel R?
Listed in the parts finder for the MG Marvel R (EP) 2021 – (132 kW) and the Marvel R 4×4 (EP) 2021 – (212 kW). Check the notes in the fitment table and compare the MG part number on your existing part.
Is this a genuine MG part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.