MG4 XPower & Mulan 4×4 Rear Brake Pads
This rear brake pad set is for the MG4 XPower and the MG Mulan 4×4, the twin-motor all-wheel-drive versions. It is a set of pads for the rear axle. The pads are ECE R90 approved and have an acoustic wear warning, which squeals when the friction material is worn and the pads need replacing.
Replace the pads when the friction material is low, the wear warning squeals or you hear a grinding noise. Electric cars do most of their braking through regeneration, so rear pads can stick or glaze from light use; check them at every service.
Choose Febi 1004624 or Blue Print ADBP420240 from the options. Both are made by the bilstein group to the same specification, so they are the same part under two brand names.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The table below shows the MG versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the MG4 XPower (MG 4 I 4×4 (EH), 320 kW) and the MG Mulan 4×4 (2022 – 2023, 315 kW) only. Not listed for the rear-wheel-drive MG4 or Mulan. Compare the MG part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Set of pads for the rear axle
- ECE R90 approved
- Acoustic wear warning built in
- Febi and Blue Print options
- Made by the bilstein group
Specifications
- Fitting Position: Rear axle
- Approval: ECE R90
- Thickness incl. Backing Plate: 14.8 mm
- Length: 122.8 mm
- Width: 59.3 mm
- Wear Warning Contact: Acoustic wear warning
- Part Number: Febi 1004624 | Blue Print ADBP420240
Replaces MG part number 11455257.
Installation
Professional installation recommended. If the car has an electric parking brake, put it into service mode before pushing the caliper pistons back. Clean and lightly grease the slide points and bed the new pads in gently.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Rear axle |
| Approval | ECE R90 |
| Thickness incl. Backing Plate | 14.8 mm |
| Length | 122.8 mm |
| Width | 59.3 mm |
| Wear Warning Contact | Acoustic wear warning |
| Part Number | Febi 1004624 | Blue Print ADBP420240 |
Fits The Following MG Models
| Model | Submodel |
|---|---|
| MG 4 I 4×4 (EH) 2023 – | (E) – 320 kW / 435 hp |
| MULAN 4×4 (CS) 2022 – 2023 | (E) – 315 kW / 428 hp |
MG4 XPower & Mulan 4×4 Rear Brake Pads FAQs
Which part numbers does it replace?
Replaces MG part number 11455257. Febi and Blue Print part numbers are listed in the specifications.
Does it fit the rear-wheel-drive MG4?
No. The parts finder lists this set for the MG4 XPower 4×4 (320 kW) and the Mulan 4×4 (315 kW) only.
Is there a wear warning?
Yes. The pads have an acoustic wear warning that squeals when the friction material is worn down.
Will it fit my MG4?
Listed in the parts finder for the MG4 XPower (MG 4 I 4×4 (EH), 320 kW) and the MG Mulan 4×4 (2022 – 2023, 315 kW) only. Not listed for the rear-wheel-drive MG4 or Mulan. Check the notes in the fitment table and compare the MG part number on your existing part.
Is Febi the same as Blue Print?
Yes. Both are made by the bilstein group and they are the same part.
Is this a genuine MG part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.