Mitsubishi i-MiEV, Peugeot iOn & Citroën C-Zero Rear Brake Shoe Fitting Kit
This rear brake shoe fitting kit fits the Mitsubishi i-MiEV, the Peugeot iOn and the Citroën C-Zero. It holds the rear brake shoes in place on the backing plate and pulls them back off the drum when you release the brake. It is a good idea to fit one whenever you change the rear shoes.
Old springs and clips lose their tension and rust over time. That can leave the shoes dragging on the drums, cause uneven braking, a weak handbrake or rattles from the rear, and it can shorten the life of brand new shoes. Because these cars do most of their braking through regeneration, the rear drums are used lightly and the springs and clips can corrode before the shoes themselves wear out.
This is Febi part number 182588, made by the bilstein group. The general service number is BRK FITTING KIT 133. No original part number is listed for this kit, so check the parts against your old ones before fitting.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The bilstein group parts finder lists this kit for the Mitsubishi i-MiEV from 2009 to 2012 and from 2012 to 2020, the Peugeot iOn and the Citroën C-Zero. The table shows every version listed. Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Rear axle drum brake kit
- Holds the shoes in place
- Helps the shoes return
- Fits i-MiEV, iOn and C-Zero
Specifications
- Fitting Position: Rear axle
- Type: Brake shoe fitting kit
- Service Number: BRK FITTING KIT 133
- Part Number: Febi 182588
Installation
Professional installation recommended. Fit the kit at the same time as new rear shoes, clean the backing plates first, adjust the shoes and handbrake afterwards, and test the handbrake before driving.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Rear axle |
| Type | Brake shoe fitting kit |
| Service Number | BRK FITTING KIT 133 |
| Part Number | Febi 182588 |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Citroën | C-Zero 2010 – 2020 | (E) – 35 kW / 48 hp |
| Citroën | C-Zero 2010 – 2020 | (E) – 47 kW / 64 hp |
| Citroën | C-Zero 2010 – 2020 | (E) – 49 kW / 67 hp |
| Mitsubishi | i-MiEV (HA3W) 2009 – 2012 | (E) – 35 kW / 48 hp |
| Mitsubishi | i-MiEV (HA3W) 2009 – 2012 | (E) – 47 kW / 64 hp |
| Mitsubishi | i-MiEV (HA3W) 2009 – 2012 | (E) – 49 kW / 67 hp |
| Mitsubishi | i-MiEV (HA4W) 2012 – 2020 | (E) – 47 kW / 64 hp |
| Peugeot | iOn 2010 – | (E) – 35 kW / 48 hp |
| Peugeot | iOn 2010 – | (E) – 49 kW / 67 hp |
| Peugeot | iOn 2010 – | (E) – 47 kW / 64 hp |
Mitsubishi i-MiEV, Peugeot iOn & Citroën C-Zero Rear Brake Shoe Fitting Kit FAQs
What does a brake shoe fitting kit do?
It holds the rear shoes in place and pulls them back off the drum when you release the brake.
Should I fit it with new shoes?
Yes. Fitting a new kit with new shoes helps them work evenly and last longer.
Is there an original part number for this kit?
No original part number is listed. The general service number is BRK FITTING KIT 133.
Will it fit my i-MiEV, iOn or C-Zero?
The parts finder lists it for the Mitsubishi i-MiEV from 2009 to 2012 and from 2012 to 2020, the Peugeot iOn and the Citroën C-Zero, on the versions in the table. Compare the part number on your existing part, or send us your registration and we will confirm.
Is this a genuine Mitsubishi, Peugeot or Citroën part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.