Nissan Leaf & e-NV200 Front Tie Rod End – Left / Right (Later Type)
This outer tie rod end connects the tie rod to the steering knuckle on the Nissan Leaf and e-NV200. It is the later type, listed for the ZE0 Leaf from 12/2013 or 05/2014 and for the ZE1. It comes with a lock nut, and the left and right ends are different parts.
A worn tie rod end usually shows as a knock over bumps, play in the steering, a split rubber boot or uneven front tyre wear.
Each side is a Febi part from the bilstein group: left is Febi 194469 and right is Febi 194763.
The table below shows the Nissan versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Nissan Leaf (ZE0, 2010 – 2018) 80 kW, Leaf (ZE1, 2017 on) 110 kW and 160 kW and e-NV200 (ME0) 80 kW. Some versions carry a note in the fitment table. The parts finder adds these notes: “from the year of construction: 12/2013”; “from the year of construction: 05/2014 / to the year of construction: 10/2016”. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Compare the Nissan part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Later type for ZE0 from 2013, ZE1 and e-NV200
- Left and right versions available
- Supplied with lock nut
- 192 mm long
- Febi quality from the bilstein group
Replaces Nissan part numbers left (Febi 194469): D8640-4FJ0A, D8640-3RA1A, D8640-3RA1B and D8640-3SG1A; right (Febi 194763): D8520-4FJ0A, D8520-3RA1A, D8520-3RA1B and D8520-3SG1A.
Installation
Professional installation recommended. Count the turns when removing the old end so the new one starts close to the right position, use a ball joint splitter on the knuckle, and have the front wheel alignment set after fitting. If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front Axle Left (194469) | Front Axle Right (194763) |
| Length | 192 mm |
| Internal Thread | M12 x 1.25 |
| Outside Thread | M10 x 1.25 |
| Spanner Size | 19 mm |
| Supplied with | Lock nut |
| Part Number | Febi 194469 (left) | Febi 194763 (right) |
Fits The Following Nissan Models
| Model | Submodel |
|---|---|
| Nissan E-NV200 (ME0) 2014 – | (E) – 80 kW / 109 hp |
| Nissan Leaf (ZE0) 2010 – 2018 from the year of construction: 12/2013 from the year of construction: 05/2014 / to the year of construction: 10/2016 | (E) – 80 kW / 109 hp |
| Nissan Leaf (ZE1) 2017 – Vehicle Identification Number (VIN): SJN************** | (E) – 160 kW / 218 hp |
| Nissan Leaf (ZE1) 2017 – Vehicle Identification Number (VIN): SJN************** | (E) – 110 kW / 150 hp |
Nissan Leaf & e-NV200 Front Tie Rod End – Left / Right (Later Type) FAQs
Which part numbers does it replace?
Replaces Nissan part numbers left (Febi 194469): D8640-4FJ0A, D8640-3RA1A, D8640-3RA1B and D8640-3SG1A; right (Febi 194763): D8520-4FJ0A, D8520-3RA1A, D8520-3RA1B and D8520-3SG1A. The Febi part numbers are 194469 and 194763.
Which side do I need?
Febi 194469 is for the front left and Febi 194763 is for the front right. Choose the side from the options above.
Which tie rod end does an early ZE0 use?
Early ZE0 cars, to the year of construction 12/2013 or 05/2014, use Febi 48202 (left) and 48204 (right), which we list separately. Compare the Nissan part number on your old part.
Will the driver assistance sensors need calibrating?
They may. The parts finder notes: “If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.”
Will it fit my Nissan Leaf?
Listed in the parts finder for the Nissan Leaf (ZE0, 2010 – 2018) 80 kW, Leaf (ZE1, 2017 on) 110 kW and 160 kW and e-NV200 (ME0) 80 kW. Some versions carry a note in the fitment table. The parts finder adds these notes: “from the year of construction: 12/2013”; “from the year of construction: 05/2014 / to the year of construction: 10/2016”. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Check the notes in the fitment table and compare the Nissan part number on your existing part.
Is this a genuine Nissan part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.