Polestar 2 Front Strut Mount Bearing
This Polestar 2 front strut mount bearing sits between the strut top mount and the spring, letting the strut and spring turn smoothly when you steer. A dry or corroded bearing can make the spring wind up and release, which you feel through the steering.
Specifications at a glance: bearing type angular ball bearing, inner diameter 35 mm, outer diameter 107 mm and width 44 mm.
Signs Your Front Strut Mount Bearing Needs Replacing
Signs of a worn bearing include a creaking, groaning or knocking noise when turning the steering, especially at low speed, and steering that feels notchy or does not return to centre smoothly. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the Polestar 2. In detail, that covers the Polestar 2 (2021 on) and Polestar 2 AWD / Dual Motor (2019 on). Across the range, it covers versions from 165 kW to 350 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
You can choose Febi or Blue Print from the options above. Both brands come from the same German parts group and are made to match the original part in fit and function, so either is a factory-quality replacement that fits without modification. It replaces original part number 32294048. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Use a proper spring compressor, fit the bearing the right way up, and have the wheel alignment checked afterwards. Fit new top mounts at the same time if the rubber is cracked. A spring compressor is essential for this job. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you. Keeping on top of worn parts also helps your car sail through its next MOT. Take a photo of the old part before you remove it, so you can compare it with the new one.
Specifications
| Specification | Value |
|---|---|
| Fitting Position | Front axle, left or right |
| Bearing Type | Angular ball bearing |
| Inner Diameter | 35 mm |
| Outer Diameter | 107 mm |
| Width | 44 mm |
| Part Number | Febi 30841 | Blue Print ADM58086 |
Fits The Following Polestar Models
| Model | Version |
|---|---|
| Polestar 2 (2021 on) | 165 kW / 224 hp |
| Polestar 2 (2021 on) | 170 kW / 231 hp |
| Polestar 2 (2021 on) | 200 kW / 272 hp |
| Polestar 2 (2021 on) | 220 kW / 299 hp |
| Polestar 2 AWD / Dual Motor (2019 on) | 300 kW / 408 hp |
| Polestar 2 AWD / Dual Motor (2019 on) | 310 kW / 421 hp |
| Polestar 2 AWD / Dual Motor (2019 on) | 350 kW / 476 hp |
Explore More Parts
Polestar 2 Front Strut Mount Bearing FAQs
Will this front strut mount bearing fit my Polestar 2?
It fits the Polestar 2. Check the part number on your existing part matches before ordering.
What part number does the Polestar 2 front strut mount bearing replace?
It replaces original part number 32294048.
What does a strut bearing sound like when it fails?
Creaking or groaning when turning the steering, especially when parking.
Should I replace both sides?
It is recommended, so the steering feels the same in both directions.
What is the difference between Febi and Blue Print?
Both come from the same German parts group and are made to match the original part in fit and function. Choose whichever you prefer.
What are the specifications of this front strut mount bearing?
Specifications at a glance: bearing type angular ball bearing, inner diameter 35 mm, outer diameter 107 mm and width 44 mm.
Should I change it with the shock absorber?
It is a good time to do it, as the strut has to come apart anyway.

Reviews
There are no reviews yet.