Polestar 2 Front Outer CV Boot Kit – Wheel Side
This CV boot kit seals the outer, wheel-side CV joint on the front drive shafts of the Polestar 2. It is a 125 mm thermoplastic boot for the left or right side.
Replace the boot as soon as it splits. A torn boot throws out grease and lets in water and grit, which soon wears out the CV joint.
This is Febi part number 48827, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification. Getting the right part first time saves time in the workshop, so compare the numbers on your old part with the ones listed here before you order.
The table below shows the Polestar versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Polestar 2 165 and 170 kW and Polestar 2 Dual Motor 300 and 350 kW. Some versions carry a note in the fitment table. The parts finder adds this note: “Fitting Position: Front Axle Left, wheel-side; Front Axle Right, wheel-side”. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Compare the Polestar part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Outer CV boot kit
- Wheel side
- 125 mm long
- Fits left or right
- Febi quality from the bilstein group
Specifications
- Fitting Position: Front axle, left or right, wheel side
- Inner Diameter: 28 / 90 mm
- Length: 125 mm
- Material: Thermoplastic
- Joint Type: CV joint
- Part Number: Febi 48827
Replaces Polestar part number 32240025.
Installation
Professional installation recommended. Clean the old grease out of the joint, refill it with fresh CV grease, fit the boot and clamps securely and check the joint turns freely.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front axle, left or right, wheel side |
| Inner Diameter | 28 / 90 mm |
| Length | 125 mm |
| Material | Thermoplastic |
| Joint Type | CV joint |
| Part Number | Febi 48827 |
Fits The Following Polestar Models
| Model | Submodel |
|---|---|
| Polestar 2 (2021 –) Fitting Position: Front Axle Left, wheel-side; Front Axle Right, wheel-side Vehicle Identification Number (VIN) to: ***********047397 |
(E) – 165 kW / 224 hp |
| Polestar 2 (2021 –) Fitting Position: Front Axle Left, wheel-side; Front Axle Right, wheel-side Vehicle Identification Number (VIN) to: ***********047397 |
(E) – 170 kW / 231 hp |
| Polestar 2 AWD / Dual Motor (2019 –) Fitting Position: Front Axle Left, wheel-side; Front Axle Right, wheel-side Vehicle Identification Number (VIN) to: ***********047397 |
(E) – 300 kW / 408 hp |
| Polestar 2 AWD / Dual Motor (2019 –) Fitting Position: Front Axle Left, wheel-side; Front Axle Right, wheel-side Vehicle Identification Number (VIN) to: ***********047397 |
(E) – 350 kW / 476 hp |
Polestar 2 Front Outer CV Boot Kit – Wheel Side FAQs
Which part numbers does it replace?
Replaces Polestar part number 32240025. The Febi part number is 48827.
Does it fit both sides?
Yes. The parts finder lists it for the front axle left and right, wheel side.
Which Polestar 2 does it fit?
The Polestar 2 165 and 170 kW and the Polestar 2 AWD 300 and 350 kW, each with a VIN-range note shown in the table.
Will it fit my Polestar 2?
Listed in the parts finder for the Polestar 2 165 and 170 kW and Polestar 2 Dual Motor 300 and 350 kW. Some versions carry a note in the fitment table. The parts finder adds this note: “Fitting Position: Front Axle Left, wheel-side; Front Axle Right, wheel-side”. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Check the notes in the fitment table and compare the Polestar part number on your existing part.
Is this a genuine Polestar part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.