Polestar 2 Inner Tie Rod – Axial Joint, 208 mm
This inner tie rod, or axial joint, connects the steering rack to the outer tie rod end on the Polestar 2. It is 208 mm long with M14 x 1.5 and M16 x 1.5 threads and comes with a nut, for the left or right side.
Replace the inner tie rod if the joint has play or knocks, the steering feels vague, or the car fails the MOT on an inner joint.
This is Febi part number 184259, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification. Getting the right part first time saves time in the workshop, so compare the numbers on your old part with the ones listed here before you order. Keep the old part until the new one is fitted and working, so you can compare them side by side if you need to.
The table below shows the Polestar versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Polestar 2 165, 170, 200 and 220 kW and Polestar 2 Dual Motor 300, 310 and 350 kW. Compare the Polestar part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Inner tie rod (axial joint)
- 208 mm long
- Nut included
- Fits left or right
- Febi quality from the bilstein group
Specifications
- Fitting Position: Front axle, left or right
- Length: 208 mm
- Outer Diameter: 40 mm
- Outside Thread: M14 x 1.5 / M16 x 1.5
- Wrench Size: 38 mm
- Contents: With nut
- Part Number: Febi 184259
Replaces Polestar part number 32333943.
Installation
Professional installation recommended. Fit a new rack boot if the old one is damaged, tighten the joint to the figure in the service information, then have the wheel alignment set.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front axle, left or right |
| Length | 208 mm |
| Outer Diameter | 40 mm |
| Outside Thread | M14 x 1.5 / M16 x 1.5 |
| Wrench Size | 38 mm |
| Contents | With nut |
| Part Number | Febi 184259 |
Fits The Following Polestar Models
| Model | Submodel |
|---|---|
| Polestar 2 (2021 –) | (E) – 165 kW / 224 hp |
| Polestar 2 (2021 –) | (E) – 170 kW / 231 hp |
| Polestar 2 (2021 –) | (E) – 200 kW / 272 hp |
| Polestar 2 (2021 –) | (E) – 220 kW / 299 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 300 kW / 408 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 310 kW / 421 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 350 kW / 476 hp |
Polestar 2 Inner Tie Rod – Axial Joint, 208 mm FAQs
Which part numbers does it replace?
Replaces Polestar part number 32333943. The Febi part number is 184259.
Does it fit both sides?
Yes. It is listed for the front axle, left and right.
Do I need an alignment?
Yes. The tracking must be set after changing a tie rod.
Will it fit my Polestar 2?
Listed in the parts finder for the Polestar 2 165, 170, 200 and 220 kW and Polestar 2 Dual Motor 300, 310 and 350 kW. Check the notes in the fitment table and compare the Polestar part number on your existing part.
Is this a genuine Polestar part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.