Renault Fluence Z.E. Front Lower Ball Joint
This ball joint with additional parts fits the front lower control arm of the Renault Fluence Z.E. on the left or the right. It bolts to the arm, so you can renew the joint without replacing the whole arm.
The ball joint lets the hub pivot as you steer and the suspension moves up and down. A worn joint causes knocks from the front over bumps, play in the steering and uneven tyre wear, and a split rubber boot lets water in and speeds up the wear. A worn ball joint is an MOT failure, so check for play whenever the car is up on a lift.
This is Febi 39493, made by the bilstein group. It replaces Renault part number 40 16 090 60R. It has a 21 mm cone, an M12 x 1.25 thread and 10.2 mm fixing holes.
The additional parts needed to fit the joint come with it.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The bilstein group parts finder lists it for the Renault Fluence 2010 -, (E) – 70 kW / 95 hp, which is the Fluence Z.E. Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Fits left or right
- Fixings included
- Cures knocks and steering play
- Made by the bilstein group to match the original
Specifications
- Fitting Position: Front axle left and right, lower
- Cone Size: 21 mm
- Outside Thread: M12 x 1.25
- Fixing Hole Diameter: 10.2 mm
Replaces Renault part number 40 16 090 60R.
Installation
Professional installation recommended. Tighten all fixings to Renault torque settings, use new nuts where supplied and have the wheel alignment checked afterwards.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front axle left and right, lower |
| Cone Size | 21 mm |
| Outside Thread | M12 x 1.25 |
| Fixing Hole Diameter | 10.2 mm |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Renault | Fluence 2010 – | (E) – 70 kW / 95 hp |
Note from the parts finder: If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
Renault Fluence Z.E. Front Lower Ball Joint FAQs
Which part numbers does it replace?
It replaces Renault part number 40 16 090 60R. The Febi part number is 39493.
Does it fit either side?
Yes. The parts finder lists it for the front axle left and right, lower.
Does it need calibration afterwards?
The parts finder notes that a sensor calibration may be necessary if the car has driver assistance systems.
Will it fit my Renault Fluence Z.E.?
The parts finder lists it for the Renault Fluence 2010 – (E) – 70 kW / 95 hp, the Fluence Z.E. Compare the part number on your existing part before ordering.
Is this a genuine Renault part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.