Tesla Interior Trim Expanding Rivet 1046705-00-C
This expanding rivet is a Febi 198461 replacement for Tesla part number 1046705-00-C. It is priced per rivet and sold in packs of 25, so the quantity on the page starts at 25 and goes up in steps of 25.
Tesla uses small plastic fasteners like this to hold trim panels, linings and covers in place. An expanding rivet has a centre pin that spreads its legs once it is pushed home, locking the panel in place. Pulling or levering the pin releases it again, although the legs can split with age. Refitting a damaged fastener can leave a panel loose, rattling or sitting out of line, so it is good practice to fit new ones whenever a panel comes off.
Check that the sizes below match your original rivet and compare the Tesla part number before ordering. Febi fasteners are made to match the original part, so they fit the same holes and hold with the same force. Keeping a spare pack in the garage also saves a wait the next time a panel needs to come off.
Key Benefits
- Priced per rivet, sold in packs of 25
- Replaces Tesla OE part number 1046705-00-C
- Made to match the original size and grip
- Restores a tight, rattle-free trim fit
- Febi quality from the bilstein group
Specifications
- Length: 18 mm
- Outer Diameter: 11 mm
- Outer Diameter 2: 10 mm
- Febi Part Number: 198461
- Sold As: Priced per rivet, sold in packs of 25
Compatibility
- Tesla vehicles that use part number 1046705-00-C
Replaces Tesla OE part number 1046705-00-C. Match this number with the one on your original rivet or in your Tesla parts catalogue before ordering. The part number is the surest way to confirm you have the right fastener, as the same rivet is often used in several places and across different models.
Installation
Use a plastic trim removal tool to ease the panel away and release the old rivet without marking the paint or trim. Clean the hole, then press the new rivet firmly into place until it seats fully and the panel sits flush.
Explore More Parts
| Attribute | Value |
|---|---|
| Length | 18 mm |
| Outer Diameter | 11 mm |
| Outer Diameter 2 | 10 mm |
| Sold As | Priced per rivet, sold in packs of 25 |
| Suitable to replace | Reference(s) |
|---|---|
| Tesla | 1046705-00-C |
Tesla Interior Trim Expanding Rivet 1046705-00-C FAQs
Is the price for one rivet or a pack?
The price shown is for one rivet. They are sold in packs of 25, so the quantity starts at 25 and goes up in 25s.
Which part number does it replace?
It replaces Tesla OE part number 1046705-00-C. The Febi part number is 198461.
Which models does it fit?
It fits Tesla vehicles that use part number 1046705-00-C. Check the number on your original rivet before ordering.
Can I reuse the old rivet?
It is best not to. Plastic rivets often crack or lose their grip when removed, which can leave the panel loose or rattling.
What size is it?
Length: 18 mm; Outer Diameter: 11 mm; Outer Diameter 2: 10 mm.
Do I need special tools?
A plastic trim removal tool makes it easier to release the old rivet without damaging the panel. The new one simply presses into place.
Reviews
There are no reviews yet.