Kia EV6 Rear Lower Control Arm Bush
This Kia EV6 rear lower control arm bush is the rubber and metal mounting that holds the suspension arm in place while absorbing road shocks and vibration. The rubber hardens and cracks with age, and the extra weight of an electric car adds to the load. A new bush is much cheaper than a complete arm when the arm is still sound.
Specifications at a glance: height 59 mm, inner diameter 14 mm, outer diameter 44 mm and material rubber / metal.
Signs Your Rear Lower Control Arm Bush Needs Replacing
Signs of a worn bush include a clunk over bumps or when braking, a vague or wandering feel at speed, uneven tyre wear and visible cracks or splits in the rubber. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the Kia EV6, EV5 and EV9. Across the range, it covers versions from 125 kW to 430 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
You can choose Febi or Blue Print from the options above. Both brands come from the same German parts group and are made to match the original part in fit and function, so either is a factory-quality replacement that fits without modification. It replaces Kia part numbers 52760-2G000, 55130-3U000 and 55130-4D000. The same part is also used by Hyundai. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
The bush is pressed into the arm. Tighten the bolt with the car at normal ride height and check the alignment. If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary. Replacing bushes on both sides keeps the handling balanced. Check the other suspension bushes while the car is raised. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you.
Specifications
| Specification | Value |
|---|---|
| Fitting Position | Rear axle, left or right, lower, outer, rear |
| Height | 59 mm |
| Inner Diameter | 14 mm |
| Outer Diameter | 44 mm |
| Material | Rubber / metal |
Fits The Following Kia Models
| Model | Version |
|---|---|
| EV5 2025 on | 160 kW / 218 hp |
| EV5 4×4 2025 on | 230 kW / 313 hp |
| EV6 2021 on | 125 kW / 170 hp |
| EV6 2021 on | 168 kW / 228 hp |
| EV6 4×4 2021 on | 239 kW / 325 hp |
| EV6 4×4 2021 on | 430 kW / 585 hp |
| EV9 2023 on | 150 kW / 204 hp |
| EV9 2023 on | 160 kW / 218 hp |
| EV9 4×4 2023 on | 283 kW / 385 hp |
Explore More Parts
Kia EV6 Rear Lower Control Arm Bush FAQs
Will this rear lower control arm bush fit my Kia EV6?
It fits the Kia EV6, EV5 and EV9. Check the part number on your existing part matches before ordering.
What part number does the Kia EV6 rear lower control arm bush replace?
It replaces Kia part numbers 52760-2G000, 55130-3U000 and 55130-4D000. The same part is also used by Hyundai.
What are the signs of a worn suspension bush?
Clunks over bumps, vague handling and uneven tyre wear are common signs.
Do I need a press to fit this bush?
Usually yes. Bushes are a press fit, so a press or bush tool is needed.
What is the difference between Febi and Blue Print?
Both come from the same German parts group and are made to match the original part in fit and function. Choose whichever you prefer.
What are the specifications of this rear lower control arm bush?
Specifications at a glance: height 59 mm, inner diameter 14 mm, outer diameter 44 mm and material rubber / metal.
Do I need an alignment?
Have the wheel alignment checked after replacing suspension bushes. If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.

Reviews
There are no reviews yet.