Front Ball Joint with Fitting Kit – Mercedes-Benz EQV
This front ball joint fits the left or right side and comes with bolts, washers and lock nuts. It has a 24 mm and 16 mm cone and an M16 x 1.5 thread.
The ball joint links the control arm to the wheel carrier. A worn joint causes knocking over bumps, wandering steering and uneven tyre wear, and excess play is an MOT failure. Replace the ball joints on both sides if they are the same age. Check the control arm bushes at the same time. The specifications below show the size and type, so you can compare them with your old part before ordering.
This is Febi part number 196626, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The bilstein group parts finder lists this ball joint for electric versions of the Mercedes-Benz EQV. The table shows every version listed. Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Front left or right
- Bolts, washers and lock nuts included
- M16 x 1.5 thread
- Made by the bilstein group
Specifications
- Cone Size, large: 24 mm
- Cone Size, small: 16 mm
- Thread Size: M16 x 1.5
- Fitting Position: Front axle left, front axle right
- Part Number: Febi 196626
Replaces Mercedes-Benz part numbers 447 330 14 07 SK, 447 330 15 07 SK and 447 333 01 27.
Installation
Professional installation recommended. Use the new bolts and lock nuts supplied and have the wheel alignment checked afterwards. If the van has driver assistance systems, sensor calibration may be needed after fitting, as the parts finder notes.
Explore More Parts
| Attribute | Value |
|---|---|
| Cone Size, large | 24 mm |
| Cone Size, small | 16 mm |
| Thread Size | M16 x 1.5 |
| Fitting Position | Front axle left, front axle right |
| Part Number | Febi 196626 |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| Mercedes-Benz | EQV (447) 2020 – | EQV 250 (E) – 150 kW / 204 hp |
| Mercedes-Benz | EQV (447) 2020 – | EQV 300 (E) – 150 kW / 204 hp |
Front Ball Joint with Fitting Kit – Mercedes-Benz EQV FAQs
Which part numbers does it replace?
It replaces Mercedes-Benz part numbers 447 330 14 07 SK, 447 330 15 07 SK and 447 333 01 27.
Does it fit both sides?
Yes, it fits the front left or right side.
Are the bolts included?
Yes, with washers and lock nuts.
Will the van need calibrating?
If the van has driver assistance systems, sensor calibration may be needed after fitting, as the parts finder notes.
Will it fit my electric car?
The parts finder lists it for the Mercedes-Benz EQV. Compare the part number on your existing part, or send us your registration and we will confirm.
Is this a genuine Mercedes-Benz part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.