Mitsubishi i-MiEV Front Stabiliser Link
This Mitsubishi i-MiEV front stabiliser link connects the anti-roll bar to the suspension, helping the car stay flat and stable in corners. Each end has a small ball joint, and those joints wear with every bump. It joins the front anti-roll bar to the suspension and helps keep the car level through corners.
Specifications at a glance: length 267 mm, material steel, outer diameter 8 mm and thread M10 x 1.25.
Signs Your Front Stabiliser Link Needs Replacing
The most common sign of a worn link is a knocking or rattling noise over bumps and uneven roads, often from one corner of the car. Play in the joints or a split boot is an MOT advisory or failure. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the Mitsubishi i-MiEV, Citroën C-Zero and Peugeot iOn. Choose the version you need from the options above. In detail, that covers the Citroën C-Zero 2010 to 2020, Mitsubishi i-MiEV (HA3W) 2009 to 2012, Mitsubishi i-MiEV (HA4W) 2012 to 2020 and Peugeot iOn 2010 on. Across the range, it covers versions from 30 kW to 49 kW. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. It replaces Mitsubishi part numbers 4056A065 and 4056A066. The same part is also used by Peugeot. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Support the car safely, hold the ball joint pins with a spanner while undoing the nuts, use the new lock nuts supplied and tighten them to the correct torque with the car standing on its wheels. Check the anti-roll bar bushes at the same time. It is one of the quickest suspension jobs to do.
Specifications
| Specification | Value |
|---|---|
| Fitting Position | Front axle left or front axle right |
| Length | 267 mm |
| Material | Steel |
| Outer Diameter | 8 mm |
| Thread | M10 x 1.25 |
| Thread Length | 18 mm |
| Wrench Size | 17 mm |
| Supplied With | Lock nuts |
| Part Numbers | Febi 48015 / 48016 |
Fits The Following Models
| Make | Model | Version |
|---|---|---|
| Citroën | C-Zero 2010 to 2020 | 35 kW / 48 hp |
| Citroën | C-Zero 2010 to 2020 | 47 kW / 64 hp |
| Citroën | C-Zero 2010 to 2020 | 49 kW / 67 hp |
| Mitsubishi | i-MiEV (HA3W) 2009 to 2012 | 35 kW / 48 hp |
| Mitsubishi | i-MiEV (HA3W) 2009 to 2012 | 47 kW / 64 hp |
| Mitsubishi | i-MiEV (HA3W) 2009 to 2012 | 49 kW / 67 hp |
| Mitsubishi | i-MiEV (HA4W) 2012 to 2020 | 30 kW / 41 hp |
| Mitsubishi | i-MiEV (HA4W) 2012 to 2020 | 47 kW / 64 hp |
| Peugeot | iOn 2010 on | 35 kW / 48 hp |
| Peugeot | iOn 2010 on | 49 kW / 67 hp |
| Peugeot | iOn 2010 on | 47 kW / 64 hp |
Explore More Parts
- All Citroën C-Zero Parts
- All Mitsubishi i-MiEV Parts
- All Peugeot iOn Parts
- All Stabiliser Links and Anti-Roll Bars
Mitsubishi i-MiEV Front Stabiliser Link FAQs
Will this front stabiliser link fit my Mitsubishi i-MiEV?
It fits the Mitsubishi i-MiEV, Citroën C-Zero and Peugeot iOn. Check the part number on your existing part matches before ordering.
What part number does the Mitsubishi i-MiEV front stabiliser link replace?
It replaces Mitsubishi part numbers 4056A065 and 4056A066. The same part is also used by Peugeot.
What does a worn anti-roll bar link sound like?
A knock or rattle over bumps, often from one corner of the car.
Should anti-roll bar links be replaced in pairs?
It is recommended, so the handling stays even.
Who makes this front stabiliser link?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this front stabiliser link?
Specifications at a glance: length 267 mm, material steel, outer diameter 8 mm, thread M10 x 1.25, thread length 18 mm and wrench size 17 mm.
Which side do I need?
Left and right are separate parts. Left is the passenger side and right is the driver side on a UK car. Choose the side from the options.

Reviews
There are no reviews yet.