Nissan Leaf Front ABS Sensor – Left / Right
This front wheel speed sensor tells the ABS, traction control and stability systems how fast each front wheel is turning. It fits the Nissan Leaf, and the same part fits either side of the front axle. It replaces OE part numbers 47910-3NA0A, 47910-3NA1A and 47910-3NA2A.
For the first-generation Leaf (ZE0, 80 kW Bilstein lists two notes, to the year of construction: 11/2015 and to the year of construction: 03/2016. For the second-generation Leaf (ZE1, 110 kW and 160 kW) it is listed to the year of construction: 09/2021. If your car was built near those dates, check your OE part number before ordering. It is not listed for the e-NV200.
On older Leafs the sensor cable often chafes or corrodes where it passes the suspension, and the result is an ABS, traction control or brake warning light on the dashboard. An illuminated ABS light is an MOT failure, so a faulty sensor needs replacing promptly.
Before fitting, check the toothed reluctor ring on the drive shaft for rust or damage, as this can trigger the same warning light. Route the cable exactly as the original, using the existing clips, so it cannot rub on the suspension or wheel as the steering turns.
Key Benefits
- Fits front left or front right
- 1365 mm cable with original-style connector
- Replaces 47910-3NA0A, 3NA1A and 3NA2A
- Cures ABS and traction control warning lights caused by a failed sensor
- Choice of Febi or Blue Print
Specifications
- Fitting Position: Front Axle Left | Front Axle Right
- Cable Length: 1365 mm
- No. of Connections: 2
- Pack Size: Single
Compatibility
- Nissan Leaf (ZE0, 2010 to 2018) – 80 kW / 109 hp, to the year of construction: 11/2015 and to the year of construction: 03/2016
- Nissan Leaf (ZE1, 2017 onwards) – 110 kW and 160 kW (e+), to the year of construction: 09/2021
- Not listed for the Nissan e-NV200
Replaces Nissan OE part numbers 47910-3NA1A, 47910-3NA0A, 47910-3NA2A.
Installation
Professional installation recommended for best results. Disconnect the 12V battery before working on the sensor wiring, and apply a little copper-free grease to the sensor body so it is easy to remove in future. Clear the fault codes with a diagnostic tool after fitting and check the warning lights go out on a short test drive.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front Axle Left | Front Axle Right |
| Cable Length | 1365 mm |
| No. of Connections | 2 |
| Pack Size | Single |
| Suitable to replace | Reference(s) |
|---|---|
| Nissan | 47910-3NA2A | 47910-3NA0A | 47910-3NA1A |
Fits The Following Nissan Models
| Model | Submodel |
|---|---|
| Nissan Leaf (ZE0) 2010 – 2018 to the year of construction: 11/2015 to the year of construction: 03/2016 |
(E) – 80 kW / 109 hp |
| Nissan Leaf (ZE1) 2017 – to the year of construction: 09/2021 |
(E) – 160 kW / 218 hp |
| Nissan Leaf (ZE1) 2017 – to the year of construction: 09/2021 |
(E) – 110 kW / 150 hp |
Nissan Leaf Front ABS Sensor – Left / Right FAQs
Does it fit the left or right side?
It fits either side of the front axle.
Which Leaf does it fit?
The ZE0 Leaf (80 kW), for which Bilstein lists two notes, to the year of construction: 11/2015 and to the year of construction: 03/2016, and the ZE1 Leaf (110 kW and 160 kW) to the year of construction: 09/2021. If you are unsure, check your OE part number.
Which part numbers does it replace?
It replaces 47910-3NA0A, 47910-3NA1A and 47910-3NA2A.
Does it fit the e-NV200?
No. The e-NV200 is not listed for this sensor.
How do I know which sensor has failed?
A diagnostic scan will show a fault code for the affected wheel. Check the wiring and connector too, as a damaged cable gives the same fault.
What is the difference between Febi and Blue Print?
Both are bilstein group brands made to the same OE specification. Choose whichever you prefer.
Reviews
There are no reviews yet.