Nissan Leaf Rear Shock Absorber Protection Kit
This protection kit fits the rear shock absorber on the Nissan Leaf. The dust cover keeps dirt and water off the piston rod and the bump stop cushions the axle at full compression.
Replace the kit when you change the shock absorbers, or if the dust cover is split or the bump stop has crumbled. A damaged cover lets grit wear the seal, so the shock starts to leak.
Choose Febi 188340 or Blue Print ADBP840060 from the options. Both are made by the bilstein group to the same specification, so they are the same part under two brand names.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification. Getting the right part first time saves time in the workshop, so compare the numbers on your old part with the ones listed here before you order.
The table below shows the Nissan versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Nissan Leaf (ZE0, 2010 – 2018) 80 kW and Leaf (ZE1, 2017 on) 110 kW and 160 kW. Some versions carry a note in the fitment table. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Compare the Nissan part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Dust cover and bump stop
- Protects the shock absorber rod
- Fits Leaf ZE0 and ZE1
- Febi and Blue Print options
Specifications
- Fitting Position: Rear axle
- Contents: Dust cover and bump stop
- Part Number: Febi 188340 | Blue Print ADBP840060
Replaces Nissan part numbers 55240-3DA0A S1, 55240-1KA0A S1 and 55240-3SB0A S1.
Installation
Professional installation recommended. Fit the new kit when the shock absorber is off the car, and tighten the top nut with the suspension at its normal ride height.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Rear axle |
| Contents | Dust cover and bump stop |
| Part Number | Febi 188340 | Blue Print ADBP840060 |
Fits The Following Nissan Models
| Model | Submodel |
|---|---|
| Nissan Leaf (ZE0) 2010 – 2018 | (E) – 80 kW / 109 hp |
| Nissan Leaf (ZE1) 2017 – Vehicle Identification Number (VIN): ZE1-****** / not for trim level: Nismo |
(E) – 160 kW / 218 hp |
| Nissan Leaf (ZE1) 2017 – Vehicle Identification Number (VIN): ZE1-****** / not for trim level: Nismo |
(E) – 110 kW / 150 hp |
Nissan Leaf Rear Shock Absorber Protection Kit FAQs
Which part numbers does it replace?
Replaces Nissan part numbers 55240-3DA0A S1, 55240-1KA0A S1 and 55240-3SB0A S1. Febi and Blue Print part numbers are listed in the specifications.
How many do I need?
One kit protects one shock absorber, so order two to do both rear shocks.
Will it fit my Nissan Leaf?
Listed in the parts finder for the Nissan Leaf (ZE0, 2010 – 2018) 80 kW and Leaf (ZE1, 2017 on) 110 kW and 160 kW. Some versions carry a note in the fitment table. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Check the notes in the fitment table and compare the Nissan part number on your existing part.
Is Febi the same as Blue Print?
Yes. Both are made by the bilstein group and they are the same part.
Is this a genuine Nissan part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.