Nissan Leaf (ZE1) Front Control Arm with Bushes & Joint – Left / Right
This front control arm is for the second-generation Nissan Leaf (ZE1). It is a sheet steel arm supplied with its bushes and ball joint fitted, and it locates the front wheel and carries the suspension loads. The left and right arms are different parts, so choose the side from the options.
Worn bushes or a loose ball joint usually cause knocks over bumps, wandering under braking, vague steering and uneven front tyre wear.
Choose the side and brand from the options: left is Febi 182086 and right is Febi 182035, and the Blue Print equivalent is ADBP860149 (right). Febi and Blue Print are both made by the bilstein group, so they are the same part under two brand names.
The table below shows the Nissan versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Nissan Leaf (ZE1, 2017 on) 110 kW and 160 kW. Not listed for the first-generation Leaf (ZE0). Some versions carry a note in the fitment table. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Compare the Nissan part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Supplied with bushes and ball joint
- Sheet steel arm
- Left and right versions available
- For the ZE1 Leaf, 110 kW and 160 kW
- Febi quality from the bilstein group
Specifications
- Fitting Position: Front Axle Left (182086) | Front Axle Right (182035)
- Material: Sheet steel
- Cone Size: 18 mm
- Supplied with: Bushes and ball joint
- Part Number: Febi 182086 (left) | Febi 182035 (right) | Blue Print ADBP860149 (right)
Replaces Nissan part numbers left (Febi 182086): 54501-4FU0A, 54501-4DA0A, 54501-4DA0B and 54501-4DA1A; right (Febi 182035): 54500-4FU0A, 54500-4DA0A, 54500-4DA0B and 54500-4DA1A.
Installation
Professional installation recommended. Tighten the bush bolts with the suspension at its normal ride height so the bushes are not preloaded, and have a wheel alignment done after fitting. If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front Axle Left (182086) | Front Axle Right (182035) |
| Material | Sheet steel |
| Cone Size | 18 mm |
| Supplied with | Bushes and ball joint |
| Part Number | Febi 182086 (left) | Febi 182035 (right) | Blue Print ADBP860149 (right) |
Fits The Following Nissan Models
| Model | Submodel |
|---|---|
| Nissan Leaf (ZE1) 2017 – Vehicle Identification Number (VIN): 1N4************** Vehicle Identification Number (VIN): SJN************** |
(E) – 160 kW / 218 hp |
| Nissan Leaf (ZE1) 2017 – Vehicle Identification Number (VIN): 1N4************** Vehicle Identification Number (VIN): SJN************** |
(E) – 110 kW / 150 hp |
Nissan Leaf (ZE1) Front Control Arm with Bushes & Joint – Left / Right FAQs
Which part numbers does it replace?
Replaces Nissan part numbers left (Febi 182086): 54501-4FU0A, 54501-4DA0A, 54501-4DA0B and 54501-4DA1A; right (Febi 182035): 54500-4FU0A, 54500-4DA0A, 54500-4DA0B and 54500-4DA1A. Febi and Blue Print part numbers are listed in the specifications.
Which side do I need?
Febi 182086 is for the front left and Febi 182035 is for the front right. Blue Print ADBP860149 is the right-hand arm.
How is this different from Febi 48158/48159?
They are different arms with different Nissan part numbers. Compare the number on your old arm with the numbers on this page.
Will the driver assistance sensors need calibrating?
They may. The parts finder notes: “If the vehicle is equipped with driver assistance systems, a sensor calibration may be necessary.”
Will it fit my Nissan Leaf?
Listed in the parts finder for the Nissan Leaf (ZE1, 2017 on) 110 kW and 160 kW. Not listed for the first-generation Leaf (ZE0). Some versions carry a note in the fitment table. Some versions are listed with a VIN-range note, shown word for word in the table; it is there for fitment information only. Check the notes in the fitment table and compare the Nissan part number on your existing part.
Is Febi the same as Blue Print?
Yes. Both are made by the bilstein group and they are the same part.
Reviews
There are no reviews yet.