Polestar 2 Front Strut Mount Bearing – 107 mm
This strut mount bearing lets the front strut turn smoothly with the steering on the Polestar 2. It is an angular ball bearing, 107 mm across and 44 mm wide, and fits the left or right side.
Replace the bearing if the steering creaks, clunks or feels notchy when turning at low speed, or if it is worn when the struts are changed.
Choose Febi 30841 or Blue Print ADM58086 from the options. Both are made by the bilstein group to the same specification, so they are the same part under two brand names.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification. Getting the right part first time saves time in the workshop, so compare the numbers on your old part with the ones listed here before you order. Keep the old part until the new one is fitted and working, so you can compare them side by side if you need to.
The table below shows the Polestar versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Polestar 2 165, 170, 200 and 220 kW and Polestar 2 Dual Motor 300, 310 and 350 kW. Compare the Polestar part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Front strut mount bearing
- 107 mm outer diameter
- Fits left or right
- All Polestar 2 versions
- Febi and Blue Print options
Specifications
- Fitting Position: Front axle, left or right
- Bearing Type: Angular ball bearing
- Inner Diameter: 35 mm
- Outer Diameter: 107 mm
- Width: 44 mm
- Part Number: Febi 30841 | Blue Print ADM58086
Replaces Polestar part number 32294048.
Installation
Professional installation recommended. Use a proper spring compressor, fit the bearing the right way up, and have the wheel alignment checked afterwards.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front axle, left or right |
| Bearing Type | Angular ball bearing |
| Inner Diameter | 35 mm |
| Outer Diameter | 107 mm |
| Width | 44 mm |
| Part Number | Febi 30841 | Blue Print ADM58086 |
Fits The Following Polestar Models
| Model | Submodel |
|---|---|
| Polestar 2 (2021 –) | (E) – 165 kW / 224 hp |
| Polestar 2 (2021 –) | (E) – 170 kW / 231 hp |
| Polestar 2 (2021 –) | (E) – 200 kW / 272 hp |
| Polestar 2 (2021 –) | (E) – 220 kW / 299 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 300 kW / 408 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 310 kW / 421 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 350 kW / 476 hp |
Polestar 2 Front Strut Mount Bearing – 107 mm FAQs
Which part numbers does it replace?
Replaces Polestar part number 32294048. Febi and Blue Print part numbers are listed in the specifications.
Does it fit both sides?
Yes. It is listed for the front axle, left and right.
Should I change it with the shock absorber?
It is a good time to do it, as the strut has to come apart anyway.
Will it fit my Polestar 2?
Listed in the parts finder for the Polestar 2 165, 170, 200 and 220 kW and Polestar 2 Dual Motor 300, 310 and 350 kW. Check the notes in the fitment table and compare the Polestar part number on your existing part.
Is Febi the same as Blue Print?
Yes. Both are made by the bilstein group and they are the same part.
Is this a genuine Polestar part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.