Steering Rack Gaiter Kit 192 mm – DS 3 E-Tense
This steering rack gaiter kit fits the left or right side and comes with clamps. The Hytrel gaiter is 192 mm long, with 12.5 mm and 52.8 mm inner diameters.
The gaiter keeps water and dirt out of the steering rack. A split gaiter lets the rack corrode and wear, and a split gaiter is an MOT failure. Check the track rod ends at the same time. The specifications below show the size and type, so you can compare them with your old part before ordering. The fitment table lists every electric version the bilstein group parts finder shows for this part, with its power output. If you are not sure which version you need, send us your registration and we will check the fitment for you. Buying the correct part first time saves a second strip-down, so check the part number and fitting position carefully.
This is Febi part number 188459, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification.
The bilstein group parts finder lists this steering gaiter kit for the DS 3 E-Tense (2023 on) 115 kW. The table shows every version listed. Compare the part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Fits left or right
- Clamps included
- Hytrel, 192 mm long
- Made by the bilstein group
Specifications
- Inner Diameter 1: 12.5 mm
- Inner Diameter 2: 52.8 mm
- Length: 192 mm
- Material: Hytrel
- Fitting Position: Front axle left, front axle right
- Part Number: Febi 188459
Replaces DS part number 4066.97.
Installation
Professional installation recommended. The track rod end has to come off, so have the wheel alignment set afterwards.
Explore More Parts
| Attribute | Value |
|---|---|
| Inner Diameter 1 | 12.5 mm |
| Inner Diameter 2 | 52.8 mm |
| Length | 192 mm |
| Material | Hytrel |
| Fitting Position | Front axle left, front axle right |
| Part Number | Febi 188459 |
Fits The Following Models
| Make | Model | Submodel |
|---|---|---|
| DS | DS3 II 2023 – | (E) – 115 kW / 156 hp |
Steering Rack Gaiter Kit 192 mm – DS 3 E-Tense FAQs
Which part numbers does it replace?
It replaces DS part number 4066.97.
Are the clamps included?
Yes, the kit comes with clamps.
Does it fit both sides?
Yes, it fits the front left or right side.
Will it fit my DS 3 E-Tense?
The parts finder lists it for the DS 3 E-Tense. Compare the part number on your existing part, or send us your registration and we will confirm.
Is this a genuine DS part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.