Nissan Leaf (ZE1) Rear Brake Pads – Electric Handbrake
This rear brake pad set is for the second-generation Nissan Leaf (ZE1) with the electric handbrake. It is a set of pads for the rear axle, ECE R90 approved, with an acoustic wear warning.
Replace the pads when the friction material is low, the wear warning squeals or you hear grinding. Rear pads see little work because of regeneration, so they often corrode or stick before they wear out.
Choose Febi 116268 or Blue Print ADN142177 from the options. Both are made by the bilstein group to the same specification, so they are the same part under two brand names.
Febi and Blue Print are brands of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification. Getting the right part first time saves time in the workshop, so compare the numbers on your old part with the ones listed here before you order.
The table below shows the Nissan versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Nissan Leaf (ZE1, 2017 on) 110 kW and 160 kW. Some versions carry a note in the fitment table. The parts finder adds this note: “for vehicles with electric handbrake”. Compare the Nissan part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Set of pads for the rear axle
- For cars with electric handbrake
- ECE R90 approved
- Acoustic wear warning built in
- Febi and Blue Print options
Specifications
- Fitting Position: Rear axle
- Approval: ECE R90
- Thickness: 15 mm
- Length: 103.8 mm
- Width: 44.9 / 47 mm
- Wear Warning Contact: Acoustic wear warning
- Part Number: Febi 116268 | Blue Print ADN142177
Replaces Nissan part numbers D4060-4EA0B, D4060-4CA0C, D4060-5SA0A, D4060-4CA0A, D4060-4CA0B and D4060-4EA0A.
Installation
Professional installation recommended. Put the electric handbrake into service mode before pushing the caliper pistons back, clean and lightly grease the slide points, and bed the new pads in gently.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Rear axle |
| Approval | ECE R90 |
| Thickness | 15 mm |
| Length | 103.8 mm |
| Width | 44.9 / 47 mm |
| Wear Warning Contact | Acoustic wear warning |
| Part Number | Febi 116268 | Blue Print ADN142177 |
Fits The Following Nissan Models
| Model | Submodel |
|---|---|
| Nissan Leaf (ZE1) 2017 – for vehicles with electric handbrake | (E) – 160 kW / 218 hp |
| Nissan Leaf (ZE1) 2017 – for vehicles with electric handbrake | (E) – 110 kW / 150 hp |
Nissan Leaf (ZE1) Rear Brake Pads – Electric Handbrake FAQs
Which part numbers does it replace?
Replaces Nissan part numbers D4060-4EA0B, D4060-4CA0C, D4060-5SA0A, D4060-4CA0A, D4060-4CA0B and D4060-4EA0A. Febi and Blue Print part numbers are listed in the specifications.
Does it fit a ZE1 with a manual handbrake?
No. The parts finder lists this set for vehicles with electric handbrake. Earlier ZE1 cars use Febi 175210.
Do I need a diagnostic tool?
Usually yes. The electric handbrake has to be put into service mode to retract the pistons.
Will it fit my Nissan Leaf?
Listed in the parts finder for the Nissan Leaf (ZE1, 2017 on) 110 kW and 160 kW. Some versions carry a note in the fitment table. The parts finder adds this note: “for vehicles with electric handbrake”. Check the notes in the fitment table and compare the Nissan part number on your existing part.
Is Febi the same as Blue Print?
Yes. Both are made by the bilstein group and they are the same part.
Is this a genuine Nissan part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.