Polestar 2 Front Anti-Roll Bar Link – 277 mm
This front anti-roll bar link, or stabiliser link, connects the front anti-roll bar to the suspension on the Polestar 2. It is 277 mm long with M10 x 1.5 threads and comes with nuts.
Replace the link if the ball joints have play, the boots are split, or you hear knocking or rattling from the suspension over bumps.
This is Febi part number 1000011, made by the bilstein group.
Febi is a brand of the bilstein group, a German parts maker that supplies replacement parts for cars and vans across the world. Each part is made to match the original in fit and function, so it fits without modification. Getting the right part first time saves time in the workshop, so compare the numbers on your old part with the ones listed here before you order. Keep the old part until the new one is fitted and working, so you can compare them side by side if you need to. If you are replacing several parts at once, use the links below to browse our other Polestar 2 parts.
The table below shows the Polestar versions listed in the bilstein group parts finder, with each note word for word. Listed in the parts finder for the Polestar 2 165, 170, 200 and 220 kW and Polestar 2 Dual Motor 300, 310 and 350 kW. Compare the Polestar part number on your existing part with the numbers on this page before ordering.
Key Benefits
- Front anti-roll bar link
- 277 mm long
- Nuts included
- Fits left or right
- Febi quality from the bilstein group
Specifications
- Fitting Position: Front axle, left or right
- Length: 277 mm
- Thread Size: M10 x 1.5
- Thread Length: 26 mm
- Wrench Size: 17 mm
- Contents: With nuts
- Part Number: Febi 1000011
Replaces Polestar part number 32344015.
Installation
Professional installation recommended. Hold the ball joint pins with the correct key while tightening the nuts so the joints do not spin, and tighten with the car at normal ride height.
Explore More Parts
| Attribute | Value |
|---|---|
| Fitting Position | Front axle, left or right |
| Length | 277 mm |
| Thread Size | M10 x 1.5 |
| Thread Length | 26 mm |
| Wrench Size | 17 mm |
| Contents | With nuts |
| Part Number | Febi 1000011 |
Fits The Following Polestar Models
| Model | Submodel |
|---|---|
| Polestar 2 (2021 –) | (E) – 165 kW / 224 hp |
| Polestar 2 (2021 –) | (E) – 170 kW / 231 hp |
| Polestar 2 (2021 –) | (E) – 200 kW / 272 hp |
| Polestar 2 (2021 –) | (E) – 220 kW / 299 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 300 kW / 408 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 310 kW / 421 hp |
| Polestar 2 AWD / Dual Motor (2019 –) | (E) – 350 kW / 476 hp |
Polestar 2 Front Anti-Roll Bar Link – 277 mm FAQs
Which part numbers does it replace?
Replaces Polestar part number 32344015. The Febi part number is 1000011.
Does it fit both sides?
Yes. It is listed for the front axle, left and right.
Should I replace both sides?
It is good practice to replace links in pairs if both are worn.
Will it fit my Polestar 2?
Listed in the parts finder for the Polestar 2 165, 170, 200 and 220 kW and Polestar 2 Dual Motor 300, 310 and 350 kW. Check the notes in the fitment table and compare the Polestar part number on your existing part.
Is this a genuine Polestar part?
No. It is a quality replacement part made by the bilstein group to match the original in fit and function.
Reviews
There are no reviews yet.