Polestar 2 Front Anti-roll Bar Link
This Polestar 2 front anti-roll bar link connects the anti-roll bar to the suspension, helping the car stay flat and stable in corners. Each end has a small ball joint, and those joints wear with every bump.
Specifications at a glance: length 277 mm, thread size M10 x 1.5, thread length 26 mm and wrench size 17 mm.
Signs Your Front Anti-roll Bar Link Needs Replacing
The most common sign of a worn link is a knocking or rattling noise over bumps and uneven roads, often from one corner of the car. Play in the joints or a split boot is an MOT advisory or failure. Catching these signs early usually means a simpler and cheaper repair. Electric cars are heavy and very quiet, so worn parts are often noticed sooner than on a petrol car.
Fitment
It fits the Polestar 2. In detail, that covers the Polestar 2 (2021 on) and Polestar 2 AWD / Dual Motor (2019 on). Across the range, it covers versions from 165 kW to 350 kW. Fitting position: front axle. If you are not sure which version you have, your V5C logbook and the part number on your existing part will help you match it.
Quality and Part Numbers
It is made by Febi, a long-established German parts brand, to match the original part in fit and function. That makes it a factory-quality replacement that fits without modification. The Febi part number is 1000011. It replaces original part number 32344015. As a direct replacement, it uses the same mountings and connections as the original. Check the part number on your existing part matches before ordering.
Fitting Advice
Hold the ball joint pins with the correct key while tightening the nuts so the joints do not spin, and tighten with the car at normal ride height. Check the anti-roll bar bushes at the same time. It is one of the quickest suspension jobs to do. Using the correct replacement part keeps your car working as its maker intended. If you are not confident fitting it yourself, any good independent garage can fit it for you. Keeping on top of worn parts also helps your car sail through its next MOT.
Specifications
| Specification | Value |
|---|---|
| Fitting Position | Front axle, left or right |
| Length | 277 mm |
| Thread Size | M10 x 1.5 |
| Thread Length | 26 mm |
| Wrench Size | 17 mm |
| Contents | With nuts |
| Part Number | Febi 1000011 |
Fits The Following Polestar Models
| Model | Version |
|---|---|
| Polestar 2 (2021 on) | 165 kW / 224 hp |
| Polestar 2 (2021 on) | 170 kW / 231 hp |
| Polestar 2 (2021 on) | 200 kW / 272 hp |
| Polestar 2 (2021 on) | 220 kW / 299 hp |
| Polestar 2 AWD / Dual Motor (2019 on) | 300 kW / 408 hp |
| Polestar 2 AWD / Dual Motor (2019 on) | 310 kW / 421 hp |
| Polestar 2 AWD / Dual Motor (2019 on) | 350 kW / 476 hp |
Explore More Parts
Polestar 2 Front Anti-roll Bar Link FAQs
Will this front anti-roll bar link fit my Polestar 2?
It fits the Polestar 2. Check the part number on your existing part matches before ordering.
What part number does the Polestar 2 front anti-roll bar link replace?
It replaces original part number 32344015.
What does a worn anti-roll bar link sound like?
A knock or rattle over bumps, often from one corner of the car.
Should anti-roll bar links be replaced in pairs?
It is recommended, so the handling stays even.
Who makes this front anti-roll bar link?
Febi, a long-established German parts brand. It is made to match the original part in fit and function.
What are the specifications of this front anti-roll bar link?
Specifications at a glance: length 277 mm, thread size M10 x 1.5, thread length 26 mm, wrench size 17 mm and contents with nuts.


Reviews
There are no reviews yet.