Tesla Model Y Parts

Work through three checks. First the version: the original Model Y, sold in the UK from 2022, or the Juniper facelift from 2025. Next the drive, because RWD, Long Range AWD and Performance cars sometimes need different parts. Last the position, front or rear and left or right. If any of that is unclear, give us your registration number and we will match the part.

For some jobs, yes. The rear anti-roll bar changes from 25.2 mm on earlier cars to 23.6 mm on Juniper, and our standard front brake pads are listed for pre-Juniper cars only. Plenty carries over, including the front lower fore link, the RWD front wheel bearing kit and the charcoal cabin filters. The Juniper year link shows what is listed for it.

Every Model Y has the charcoal cabin filter pair inside the car. Some also have an under-bonnet HEPA system, which takes the HEPA set listed against Tesla 1658375-00-A and related numbers, sold here as Febi 182566 or Blue Print ADBP250074, plus a pre-filter. If you are not sure whether your car has the HEPA housing, send us the registration number before ordering.

Our Model Y wiper guide gives 650 mm (26 inch) on the driver’s side and 500 mm (20 inch) on the passenger side, for earlier cars and Juniper alike. The Bosch A622S twin pack listed here is that 650 mm and 500 mm pairing. The passenger blade is longer than the Model 3’s, so check both lengths on the listing before you buy.

Often. The two cars share the charcoal cabin filters, the 28 mm front anti-roll bar, tie rod ends, motor mounts and several arms and bushes, and those listings name both models. Other parts are Model Y only, such as the rear anti-roll bars, the front lower fore link and the HEPA set. For your Model Y, look for Model Y in the product title.